GigaPort VDSL2 Ethernet Bridge Modem (Single Unit) with PoE Output (NV-320SE)

• Single NV-320SE Remote Unit with Power Supply Included: Includes one NV-320SE GigaPort VDSL2 Bridge Modem with PoE output and a 54VDC power adapter.
• Compatible Netsys Unit Required: The NV-320SE must be paired with a compatible Netsys VDSL2 bridge modem such as the NV-202G to establish a network link. For a complete solution, see the NV-320SEKIT (2-Unit Kit).
• Remote PoE Output: Provides up to 30W of 802.3af/at PoE output per Ethernet port for IP cameras, wireless access points, VoIP phones, and other PoE-enabled devices.
• External Power Required: The NV-320SE requires 54VDC power (adapter included) for operation and to provide PoE output to connected devices.
• Long-Distance Ethernet Extension: Extend Ethernet over existing phone line or twisted-pair cabling instead of installing new network infrastructure.
• Flexible Copper Connectivity: Connects via RJ-11 or Terminal Block over a single twisted pair, including Cat5/6/7 cable or existing phone lines.
• Modern Replacement for NV-202P: High-speed successor to the legacy Netsys NV-202P with integrated PoE output and Gigabit Ethernet ports.

The Netsys NV-320SE GigaPort VDSL2 Bridge Modem with Remote PoE Output is designed for high-speed point-to-point Ethernet extension over existing copper infrastructure. This standalone NV-320SE remote unit must be paired with a compatible Netsys VDSL2 bridge modem, such as the NV-202G, to establish a network link. For new installations, we recommend the NV-320SEKIT, which includes one NV-202G unit and one NV-320SE unit pre-configured for plug-and-play deployment.

The NV-320SE is the modern replacement for the legacy Netsys NV-202P and is fully compatible with existing Netsys VDSL2 deployments. It is an ideal choice for users looking to source spare units, expand existing installations, or replace older remote units in hotels, campuses, commercial buildings, and other long-distance Ethernet applications.

Using VDSL2 technology, the NV-320SE establishes a high-speed bridge over a single twisted pair of copper wiring, including Cat5, Cat6, Cat7, or legacy phone lines, through the integrated RJ-11 Line Port or 2-pin Terminal Block. Dual 10/100/1000 Mbps Ethernet ports with integrated PoE injectors provide up to 30W of 802.3af/at PoE output per port for IP cameras, wireless access points, VoIP phones, and other PoE-enabled devices.

The NV-320SE requires its included 54VDC power adapter for operation and to provide PoE output to connected devices. Supporting symmetrical speeds up to 160Mbps (320Mbps aggregate bandwidth), the unit delivers reliable long-distance Ethernet performance while remaining completely network transparent. Advanced features including selectable VDSL2 band profiles, G.INP mode, and SNR margin settings allow performance to be optimized for a wide range of cable conditions and installation environments.

• NO CONFIGURATION REQUIRED
• Plug and play, cost-effective Ethernet extension up to 10,000 feet (3 km) over existing phone lines or network cable
• 2 X Auto-sensing 10/100/1000 Mbps Ethernet port with Auto MDIX with built-in PoE injectors to provide power to network devices (NV-320SE Remote Unit)
• Ideal for remotely located IP Cameras or Wireless Access Points that require PoE
• RJ-11/Terminal Block combo for Line port.
• Supports high bandwidth up to 160Mbps symmetrical (320Mbps aggregate)
• Supports long reach mode up to 10,000 feet (3 km) with 24 gauge twisted-pair phone wire
• DIP switch selectable SNRM Level
• DIP switch selectable G.INP mode
• 8 X DIP switch selectable VDSL2 band profiles
• Supports Jumbo frame (MTU) 2K bytes on VDSL side
• Wall mountable
• RoHS compliant
• Compact desktop design
• 802.3 Ethernet
• 802.3u Fast Ethernet
• 802.3ab Ethernet
• 802.3af/802.3at Power over Ethernet (NV-320SE)
• G993.2 VDSL2
• On-board TDK surge arrester (surge protection)

Product Contents

• 1 X GigaPort VDSL2 Ethernet Bridge Modem with PoE (NV-320SE)
• 1 X User Manual Download Hyperlink
• 4 X Plastic Feet (attached)
• 1 X DC54V / 1.66A Desktop Adapter
• 1 X Straight-through Ethernet Cable
• 1 X RJ-11 Cable

Cable Connections

• RJ-45 (Ethernet): Category 3~6 UTP/STP
• RJ-11 (VDSL2): Twisted Pair phone wire

LED Indicators

• 1 x Power LED
• 2 x Link/Active Status for Ethernet port
• 1 x Link LED for VDSL2 port
• 1 x CO Mode indicator LED
• 1 x CPE Mode indicator LED
• 2 x PoE Link Indicator LED

VDSL2 Line Code

• Discrete multitone (DMT) modulation

VDSL2 Transmission Mode

• Packet Transfer Mode (PTM)

Power & PoE

• Input Voltage: 100-240Vac to 54VDC Commercial-grade desktop Power Adapter
• Output: 30 W max for each. (Pin Assignment:4/5(+),7/8(-))

Power Requirement: Input Voltage

• 54VDC (Commercial-grade Power Adapter)

EMC

• EMI Compliant: FCC class B
• EMS Compliant: CE mark class B

Operating Temperature

• 0°C ~ 50°C (32°F ~ 122°F)
• Fanless, free air cooling

Storage Temperature

• -20°C ~ 70°C (-4°F ~158°F)

Humidity

• 10% to 90% (non-condensing)

Mounting Method

• Desktop or Under Counter

Agency Compliance

• FCC Part 15 Class A, CE
• RoHS compliant

Warranty

• 2 years (parts only)