![Kit - HyperXtender ER Ethernet Extender - NV-202EKIT - {product_type] - Ethernet Extender - www.netsys-direct.com](http://cdn.shopify.com/s/files/1/1695/9313/products/NV-202EKIT_3D_HyperXtender_ER_Ethernet_Extender-grande_b9d47550-5b41-4b56-be6d-d6a33192e62f_530x.jpeg?v=1546232257)
- Product Details
Questions & Answers
-
I need to extend cat6 10/100/1000 to 500Ft
The NV-202EKIT is the perfect solution for this application! The NV-202EKIT will extend your LAN up to 10,000 feet using a single twisted pair of network or phone grade cable (including Cat6), and offers line speeds up to 100Mbps symmetrical up to 1,000 feet.
The NV-202EKIT includes two NV-202E Ethernet extenders, with one configured ad CO/local, and the other configured as CPE/remote. The NV-202E configured as local is typically installed at the origination point (where the router or switch is) and the NV-202E configured as remote is typically installed at the destination point ( remote location you are extending your Ethernet connection to). The long cable between the two NV-202E units connects to the Line port of each NV-202E (either RJ-11 port or 2-pin terminal block).
Please let me know if you have any other questions!
Thanks! -
I have three areas in my home I need to use this in. I have a three pair phone cable running thru the home. The cable is untwisted, will their be interference issues using three kits on the same cables on different pairs? Is this an acceptable usage?
The NV-202EKIT requires one twisted pair of network or phone grade cable to function, so the untwisted cable will not work properly if at all and three kits on the same cable will make matters worse. Are you sure the cable is not twisted? Old style phone cable is typically twisted, but not as twisted as network grade cable. What is the Cable mfg and model? What is the color coding?
-
Can I use this system to extend Ethernet to Wi-Fi router? The distance is approximately 300'.
Yes, you can, but you shouldn’t need to at 300 feet if you’re using a Cat5 or better Ethernet Cable.
-
what did you do for the wire junction ? 6 rolls of 1000 feets. Crimp rj45 connector or just connect the pair together with solder and waterproof tape (shorther as possible) ?
Assuming this cable will be installed outdoors, there are many coupler/splice solutions available on the market. The solution needs to be outdoor rated, water/weather proof and direct bury rated depending on the installation. Some solutions involve outdoor telecom/network enclosures which make splices easier and accessible, but adds cost to the installation.
If the splices are being made indoors, then you could use our GF2120 Tool-less Ethernet Coupler/Splicer:
https://www.netsys-direct.com/collections/tool-less-networking/products/gf-innovations-tool-less-10-100-1000-ethernet-coupler-splicer-gf2120
Please give us a call at 1-877-638-7971 or email us at support@netsys-america.com if you require further assistance.
Thank you!