Industrial Grade Managed VDSL2 Modem (CO or CPE selectable) - NV-700I

• Industrial Managed Component: A single ruggedized VDSL2 modem requiring a compatible partner device (minimum 2 units) to establish a managed point-to-point link.
• Industrial Solutions: For a pre-configured kit, see the NV-700IKIT. For an unmanaged industrial solution, we recommend the NV-520GKIT.
• Ruggedized for Harsh Environments: Features a durable metal enclosure with integrated DIN-rail mounting and a wide operating temperature range (-20°C to 70°C / -4°F to 158°F).
• High-Speed & Extended Reach: Delivers aggregate speeds up to 200Mbps (100Mbps symmetric) at distances up to 1,000 feet, with a maximum operating range of 10,826 feet (3.3km) over a single twisted pair.
• Cable Connections: Features an integrated RJ-11/Terminal Block line port for establishing the link over phone lines or network cable (Cat5, Cat6, or Cat7), plus four (4) 10/100Mbps Ethernet ports for connecting local network devices (IP cameras, APs, etc.).
• Power Requirement Note: Designed to utilize an external 12 to 48VDC power source; AC power adapters are not provided with this unit.
• Advanced Management: Features a web-based interface for remote monitoring, IP address assignment, static routing (IPv4/IPv6), and eight selectable VDSL2 band profiles.

The Netsys NV-700I Industrial Managed VDSL2 Ethernet Extender is a ruggedized component designed for point-to-point applications requiring granular network control in demanding environments. Utilizing VDSL2 technology, the NV-700I establishes a stable ethernet bridge over existing copper infrastructure, providing a reliable alternative to fiber in factories, traffic control cabinets, and outdoor enclosures. As this is a single component, a minimum of two (2) units or a compatible Netsys VDSL2 partner device is required to establish a link.

The NV-700I can be configured as either a CO (Central Office) or CPE (Customer Premises Equipment) unit via its web-based management tool. This interface allows for remote monitoring, static routing configuration, and optimization via eight selectable VDSL2 band profiles. With its durable metal chassis, DIN-rail mounting, and wide operating temperature range, the NV-700I is engineered for reliable performance in unconditioned spaces. Please note that the NV-700I is designed to utilize an external DC power source (12 to 48VDC) and does not include an AC power adapter.

• ARM Cortex A9 dual-core processor
• Supports G.998.4 G.INP
• Supports up to 100 Mbps symmetric
• Supports 8 VDSL band profiles
• Supports IPv4/IPv6 NTP Client
• Supports static routing for IPv4 and IPv6 forwarding
• Mac Address based filtering
• Web-based management
• Supports IGMP snooping v2/v3
• Compliant with IEEE 802.3 & 802.3u Ethernet Standard
• Supports VLAN Tag pass through
• Compliant with ITU-T G993.2 VDSL2 standard
• Supports 8 queue MFC/DSCP both type QoS
• Supports HTTP/HTTPS web management
• Supports SSL / SSH security
• Supports remote management and monitor
• Supports configuration backup and restore
• On board surge protection for Line port
• Supports CO side bridge mode
• Supports Dual Firmware Image Backup
• Supports SNMP v1/v2
• Supports TR-069

Package Contents

• 1 X NV-700I Industrial Grade Managed VDSL2 Modem
• 1 X User Manual Download Link
• 1 X DIN-Rail mounting plate & Screws
• Protective caps (Console, RJ-11, RJ-45)
• 1 X 6-pin Terminal Block
• 1 X 2-pin Terminal Block

Cable Connections

• 4 x RJ-45 10/100Mbps auto-negotiation Ethernet port
• 1 x RJ-11 / Terminal combo for VDSL2 line port
• 1 x Reset Button for resetting to factory default

Terminal Blocks (Power)

• 1 X Removable 6-contact terminal block for Power1 and alarm contact
• 1 X Removable 2-contact terminal block for Power2

LED Indicators

• 1 x Power LED
• 4 x Link/Active Status for Ethernet port
• 1 x Link LED for VDSL2 line port
• 1 X CO Mode LED

Switch Method

• Store and forward

Flow Control

• Full duplex: IEEE 802.3x
• Half duplex: Back pressure

Power Requirements

• Input Voltage: 12 to 48VDC
• Input Current: 0.5~0.125A

Operating Temperature

• -20°C ~ 70°C (-4°F ~ 158°F)

Storage Temperature

• -40°C ~ 70°C (-40°F ~ 158°F)

Humidity

• 5 to 95% (non-condensing)

Dimensions

• 182mm x 142mm x 35.5mm (7.16" x 5.59 " x 1.39 ")

Shipping Weight

• 2 lbs (0.9 kg)

Warranty

• 2 years (parts only)