GigaPort VDSL2 Ethernet Extender Kit (Includes 2 Units) with Remote PoE Output (NV-320SEKIT)

• Complete 2-Unit Kit with Power Supplies Included: Includes one NV-202G local unit, one NV-320SE remote unit, a 12VDC power adapter for the NV-202G, and a 54VDC power adapter for the NV-320SE.
• Remote PoE Output: The NV-320SE provides up to 30W of 802.3af/at PoE output per Ethernet port for IP cameras, wireless access points, VoIP phones, and other PoE-enabled devices.
• Long-Distance Ethernet Extension: Extend Ethernet over existing phone line or twisted-pair cabling instead of installing new network infrastructure.
• Flexible Copper Connectivity: Units connect via RJ-11 or Terminal Block over a single twisted pair, including Cat5/6/7 cable or existing phone lines.
• 320Mbps Aggregate Bandwidth: Supports Gigabit Ethernet equipment with symmetrical speeds up to 160Mbps.
• Modern Replacement for NV-202PEKIT: High-speed successor to the legacy NV-202P and NV-202PEKIT with integrated remote PoE output.
• External Power Required for Both Units: Both the NV-202G and NV-320SE require external power for operation. Power supplies are included.

The NV-320SEKIT GigaPort VDSL2 Ethernet Extender Kit with Remote PoE Output includes two pre-configured bridge modems that extend Ethernet connectivity far beyond the 328-foot (100m) limitation of standard Ethernet cabling. Using a single twisted pair of copper wire, the kit can deliver high-speed network connectivity over existing phone lines or Cat5/6/7 cable runs, helping eliminate the cost and disruption of installing new network infrastructure.

The kit consists of one NV-202G Local Unit and one NV-320SE Remote Unit, pre-configured for plug-and-play operation. The NV-320SE features two Gigabit Ethernet ports with integrated 802.3af/at PoE output, making it ideal for powering remote IP cameras, wireless access points, VoIP phones, and other PoE-enabled devices.

Both units require external power for operation and include the necessary power adapters. The NV-202G includes a 12VDC power adapter, while the NV-320SE includes a 54VDC power adapter used to provide PoE output to connected devices.

Supporting symmetrical speeds up to 160Mbps (320Mbps aggregate bandwidth), the NV-320SEKIT delivers reliable long-distance Ethernet performance while remaining completely network transparent. Advanced features including selectable VDSL2 band profiles, G.INP mode, and SNR margin settings allow performance to be optimized for a wide range of cable conditions and installation environments.

• NO CONFIGURATION REQUIRED
• Plug and play, cost-effective Ethernet extension up to 10,000 feet (3 km) over existing phone lines or network cable
• 2 X Auto-sensing 10/100/1000 Mbps Ethernet port with Auto MDIX with built-in PoE injectors to provide power to network devices (NV-320SE Remote Unit)
• 2 X Auto-sensing 10/100/1000 Mbps Ethernet port with Auto MDIX (NV-202E Local Unit)
• Ideal for remotely located IP Cameras or Wireless Access Points that require PoE
• RJ-11/Terminal Block combo for Line port.
• Supports high bandwidth up to 160Mbps symmetrical (320Mbps aggregate)
• Supports long reach mode up to 10,000 feet (3 km) with 24 gauge twisted-pair phone wire
• DIP switch selectable SNRM Level
• DIP switch selectable G.INP mode
• 8 X DIP switch selectable VDSL2 band profiles
• Supports Jumbo frame (MTU) 2K bytes on VDSL side
• Wall mountable
• RoHS compliant
• Compact desktop design
• 802.3 Ethernet
• 802.3u Fast Ethernet
• 802.3ab Ethernet
• 802.3af/802.3at Power over Ethernet (NV-320SE)
• G993.2 VDSL2
• On-board TDK surge arrester (surge protection)

• 1 X GigaPort VDSL2 Ethernet Bridge Modem with PoE (NV-320SE)
• 1 X GigaPort VDSL2 Ethernet Bridge Modem (NV-202G)
• 1 X User Manual Download Hyperlink
• 8 X Plastic Feet (attached)
• 1 X 12V AC to DC Power Adapter for NV-202G
• 1 X DC54V /1.66A Desktop Adapter for NV-320SE
• 2 X Straight-through Ethernet Cables
• 2 X RJ-11 Cables

• RJ-45 (Ethernet): Category 3~6 UTP/STP
• RJ-11 (VDSL2): Twisted Pair phone wire

• 1 x Power LED
• 2 x Link/Active Status for Ethernet port
• 1 x Link LED for VDSL2 port
• 1 x CO Mode indicator LED
• 1 x CPE Mode indicator LED
• 2 x PoE Link Indicator LED (NV-320SE Only)

• Discrete multitone (DMT) modulation

• Packet Transfer Mode (PTM)

• Input Voltage: 100-240Vac to 54VDC Commercial-grade desktop Power Adapter
• Output: 30 W max for each. (Pin Assignment:4/5(+),7/8(-))

• NV-320SE: 54VDC (Commercial-grade Power Adapter)
• NV-202G: External Switching Power Adapter (Input: 85-240V AC, 50/60Hz Output: 12V/1A)

• EMI Compliant: FCC class B
• EMS Compliant: CE mark class B

• 0°C ~ 50°C (32°F ~ 122°F)
• Fanless, free air cooling

• -20°C ~ 70°C (-4°F ~158°F)
• -20°C ~ 70°C (-4°F ~158°F)

• 10% to 90% (non-condensing)

• Desktop or Under Counter

• 4 lbs. (1.81 Kg)

• FCC Part 15 Class A, CE
• RoHS compliant

• 2 years (parts only)