cross
NM-2000EMKIT

GigaPort 1.25G (2km) Single Strand Multimode Fiber Media Converter Kit - NM-2000EMKIT

cross
NM-2000EMKIT

GigaPort 1.25G (2km) Single Strand Multimode Fiber Media Converter Kit - NM-2000EMKIT

GigaPort 1.25G (2km) Single Strand Multimode Fiber Media Converter Kit - NM-2000EMKIT

NetsysSKU: NM-2000EMKIT

Price:
Sale price£131.00 Regular price£147.00

Description

Description

The Netsys GigaPort 1.25G (2km) Single Strand Multimode Fiber Media Converter Kit (NM-2000EMKIT) includes 2 X NM-2000E GigaPort Fiber Media Converters, 1 X NS-GLC-BX02-U35 SFP module, 1 x NS-GLC-BX02-D53 SFP module, and provides a point-to-point Ethernet network extension up to 6,561 feet (2km) using a single strand of multimode fiber. The rear DIP switch panel of the NM-2000E GigaPort Fiber Media Converters allows users to enable/disable isolation mode for the RJ-45 Ethernet Ports and link fault passthrough, as well as selecting 100M/1.25G/2.5G SFP mode.

The Gigabit Single Strand Multimode Fiber Media Converter Kit is simple to install and use, and comes pre-configured for plug-and-play installation. One NM-2000E converter is typically located in the Central Office, Computer Room, or Wiring Closet with one of its RJ-45 Ethernet port connected to a router or switch, with one SFP module connecting directly to the single strand of multimode fiber or with a fiber patch cable (not provided). The single strand of multimode fiber can extend up to 6,561 feet (2km) to the remote device location. The other NM-2000E converter is placed at the remote location, with the other SFP module connected to the single strand fiber and the Ethernet port(s) of the remote network device(s) (NIC, router, switch, etc.). Last, the NM-2000E Converters are connected to the AC power source and the link is established automatically on power up.

Features

    • Pre-configured for plug-and-play installation
    • 2 x RJ-45 10/100/1000Mbps Gigabit Ethernet Ports
    • Supports IEEE 802.3 10Base-T, 802.3u 100Base-T and 802.3ab 1000Base-T Ethernet Standards
    • Includes 2 X SFP transceivers for multimode fiber
    • Supports up to 9k Jumbo frames pass through
    • Data Transfer Rate: 1000Mbps
    • Supports full or half-duplex mode by Auto-Negotiation
    • Supports LFP(Link Fault Passthrough) function
    • DIP Switch selectable 100M/1.25G.2.5G SFP mode, and RJ-45 Ethernet Port Isolation Mode
    • EMI certified by CE, FCC
    • RoHS compliant

Technical Specifications

Product Kit Contents

    • 2 X NM-2000E Gigabit Media Converters
    • 1 X NS-GLC-BX02-U35 SFP BIDI, Single LC Connector, 1310nm FP LD for Multimode Fiber (see data sheet)
    • 1 X NS-GLC-BX02-D53 SFP BIDI, Single LC Connector, 1550nm FP LD for Multimode Fiber (see data sheet)
    • 1 X User Guide Download Hyperlink
    • 2 X AC to DC Power Adapter

Note: Fiber patch cables not provided.

Protocols and Standards

    • IEEE802.3u/IEEE802.3ab, IEEE802.3z

Regulatory Compliance

    • FCC
    • CE
    • RoHS Compliance

Physical Interface

    • Copper: 2 X 10/100/1000 Base-T RJ-45 (Auto-MDIX)
    • Fiber Optic: SFP Slot (also supports copper xDSL SFP modules)
    • 1 x Power LED
    • 2 x Link/Active Status for Ethernet ports
    • 2 x 1G Status for Ethernet ports
    • 2 x 100M Status for Ethernet ports
    • 1 x Link/Active for SFP
    • 1 x 1.25G Status for SFP
    • 1 x 2.5G Status for SFP

Cabling

    • Ethernet: 10/100/1000Base-T/Ethernet (Copper): 2-Pair UTP Cat 5 or above
    • Fiber Optic: SFP Slot

Jumbo frame

    • 9K Bytes

TX/RX Optical Frequency

    • Flexible (Depending on Fiber Transceiver)

External Power Adapter

    • Input: AC 100-240 volts/ 50-60Hz
    • Output: 125V/1A

Typical Power Consumption

    • 3W

Operating Temperature

    • 0°C~ 50°C (32°F ~ 122°F)

Storage Temperature

    • -20°C ~ 70°C (-4°F ~ 158°F)

Humidity

    • 10 to 90% (non-condensing)

Shipping Weight

    • 2 lbs

Dimensions

Warranty

    • 2 years

For Shipping and Returns Policy click Here.

You may also like

Recently viewed