GigaPort VDSL2 Ethernet Extender Kit (320Mbps) with PoE Remote Unit - NV-320SEKIT

• Plug-and-Play 2-Unit Kit with PoE Output: Complete point-to-point link including one Local unit, and one Remote unit with dual PoE output ports.
• Integrated PoE Power: Remote unit (NV-320SE) provides up to 30W of PoE (802.3at) to each Gigabit Ethernet port.
• Backwards Compatible: Modern, high-speed replacement for the legacy Netsys NV-202P and NV-202PEKIT.
• Flexible Copper Interconnect: Units connect via RJ-11 or Terminal Block over any single twisted pair (Cat5/6/7 or phone line).
• Gigabit Ethernet Ports: Features 10/100/1000 Mbps RJ-45 ports with up to 320Mbps aggregate line bandwidth.
• Proven Reliability: Reach up to 10,000 feet (3km) with DIP-selectable G.INP for noisy environments.

The Netsys NV-320SEKIT GigaPort VDSL2 Ethernet Extender Kit with PoE is a professional-grade solution designed to extend high-speed network connections beyond the 328-foot (100m) limit of standard Ethernet and provide power to remote PoE devices. This kit is the modern replacement for the legacy Netsys NV-202P and NV-202PEKIT, providing a high-speed point-to-point Ethernet bridge over any single twisted pair of copper—including Cat5, Cat6, Cat7, or legacy phone lines.

The NV-320SEKIT includes one NV-202G unit and one NV-320SE unit. While both units are CO/CPE selectable via DIP switch for maximum flexibility, the NV-320SEKIT comes pre-configured for instant plug-and-play deployment with the NV-320SE unit set to CPE mode. The NV-320SE features built-in PoE injectors, providing 30W PoE output to power remote IP cameras, wireless access points, or VoIP phones directly from its dual 10/100/1000 Mbps Ethernet ports. Note: The NV-320SE remote unit requires its own power source (54V DC adapter provided) to deliver PoE to peripheral devices.

The NV-320SEKIT supports Gigabit equipment and achieves symmetrical line speeds up to 160Mbps (320Mbps aggregate bandwidth) using the integrated RJ-11 Line Port or 2-pin Terminal Block. For challenging installations, the DIP-switch selectable G.INP mode and 8 different VDSL2 band profiles allow you to maximize stability and performance even in high-interference environments.

• NO CONFIGURATION REQUIRED
• Plug and play, cost-effective Ethernet extension up to 10,000 feet (3 km) over existing phone lines or network cable
• 2 X Auto-sensing 10/100/1000 Mbps Ethernet port with Auto MDIX with built-in PoE injectors to provide power to network devices (NV-320SE Remote Unit)
• 2 X Auto-sensing 10/100/1000 Mbps Ethernet port with Auto MDIX (NV-202E Local Unit)
• Ideal for remotely located IP Cameras or Wireless Access Points that require PoE
• RJ-11/Terminal Block combo for Line port.
• Supports high bandwidth up to 160Mbps symmetrical (320Mbps aggregate)
• Supports long reach mode up to 10,000 feet (3 km) with 24 gauge twisted-pair phone wire
• DIP switch selectable SNRM Level
• DIP switch selectable G.INP mode
• 8 X DIP switch selectable VDSL2 band profiles
• Supports Jumbo frame (MTU) 2K bytes on VDSL side
• Wall mountable
• RoHS compliant
• Compact desktop design
• 802.3 Ethernet
• 802.3u Fast Ethernet
• 802.3ab Ethernet
• 802.3af/802.3at Power over Ethernet (NV-320SE)
• G993.2 VDSL2
• On-board TDK surge arrester (surge protection)

Product Kit Contents

• 1 X GigaPort VDSL2 Ethernet Bridge Modem with PoE (NV-320SE)
• 1 X GigaPort VDSL2 Ethernet Bridge Modem (NV-202G)
• 1 X User Manual Download Hyperlink
• 8 X Plastic Feet (attached)
• 1 X 12V AC to DC Power Adapter for NV-202G
• 1 X DC54V /1.66A Desktop Adapter for NV-320SE
• 2 X Straight-through Ethernet Cables
• 2 X RJ-11 Cables

Cable Connections

• RJ-45 (Ethernet): Category 3~6 UTP/STP
• RJ-11 (VDSL2): Twisted Pair phone wire

LED Indicators

• 1 x Power LED
• 2 x Link/Active Status for Ethernet port
• 1 x Link LED for VDSL2 port
• 1 x CO Mode indicator LED
• 1 x CPE Mode indicator LED
• 2 x PoE Link Indicator LED (NV-320SE Only)

VDSL2 Line Code

• Discrete multitone (DMT) modulation

VDSL2 Transmission Mode

• Packet Transfer Mode (PTM)

Power & PoE (NV-320SE)

• Input Voltage: 100-240Vac to 54VDC Commercial-grade desktop Power Adapter
• Output: 30 W max for each. (Pin Assignment:4/5(+),7/8(-))

Power Requirement: Input Voltage

• NV-320SE: 54VDC (Commercial-grade Power Adapter)
• NV-202G: External Switching Power Adapter (Input: 85-240V AC, 50/60Hz Output: 12V/1A)

EMC

• EMI Compliant: FCC class B
• EMS Compliant: CE mark class B

Operating Temperature

• 0°C ~ 50°C (32°F ~ 122°F)
• Fanless, free air cooling

Storage Temperature

• -20°C ~ 70°C (-4°F ~158°F)
• -20°C ~ 70°C (-4°F ~158°F)

Humidity

• 10% to 90% (non-condensing)

Mounting Method

• Desktop or Under Counter

Shipping Weight

• 4 lbs. (1.81 Kg)

Agency Compliance

• FCC Part 15 Class A, CE
• RoHS compliant

Warranty

• 2 years (parts only)