GigaPort Industrial Grade VDSL2 Ethernet Bridge Modem - Single Unit (NV-520G)

• Individual Industrial Component: Single NV-520G GigaPort Industrial Grade VDSL2 Ethernet Bridge Modem for compatible point-to-point deployments.
• Compatible Unit Required: This unit must be used with a compatible Netsys VDSL2 Ethernet extender or bridge modem, such as another NV-520G or compatible legacy unit, to establish a network link. Also available as a pre-configured 2-unit kit (NV-520GKIT).
• Industrial Deployment Ready: Rugged DIN-rail metal housing with redundant 15~48V DC power inputs, relay alarm support, surge protection, and fanless operation. External DC power required. Power supply is not included.
• Industrial Infrastructure Reuse: Extend Ethernet networks over existing twisted-pair copper wiring, including Cat5/6/7 cable or legacy phone line wiring.
• 4-Port Gigabit Ethernet Design: Includes four 10/100/1000 Mbps RJ-45 ports for connecting multiple network devices at the local or remote end of the extension link.

The Netsys NV-520G GigaPort Industrial Grade VDSL2 Ethernet Bridge Modem is designed to extend Ethernet networks over existing twisted-pair copper infrastructure, including Cat5/6/7 cable or legacy phone line wiring. This industrial-grade bridge modem supports long-distance point-to-point Ethernet extension for applications where standard Ethernet cabling is limited to 328 feet (100m). The NV-520G must be paired with a compatible Netsys VDSL2 bridge modem to establish a network link.

The NV-520G supports symmetrical VDSL2 transmission speeds up to 160Mbps and deployment distances up to 10,000 feet (3km), depending on cable quality, distance, and operating profile. Industrial features including redundant 15~48V DC power inputs, relay alarm support, surge protection, DIN-rail mounting, and fanless operation make the NV-520G suitable for demanding industrial networking environments. External DC power required. Power supply is not included.

For challenging installations, the NV-520G supports DIP-switch selectable CO/CPE operation and multiple VDSL2 transmission profiles, including G.INP noise-tolerant modes designed to improve stability and performance in high-interference environments.

• Provides high bandwidth of up to 160Mbps symmetric (320Mbps aggregate) over Line ports
• Supports 4 X 10/100/1000Mbps Ethernet Ports
• Supports auto speed and 8 VDSL2 Profiles selectable via dip switch
• Supports long reach mode up to 10,000 ft / 3 km
• DIP Switch with selectable CO and CPE modes
• Supports Jumbo frame up to 2k bytes
• Built-in surge protection
• Provides power redundancy and wide-range dual power input (DC15V ~ 48V)
• Supports Overload Current Protection
• Supports wide range of operating temperatures (-20°C ~70°C)
• Supports Reverse Polarity Protection
• Supports alarm contact (relay output - 1 A @ 24 VDC)
• Provides DIN-Rail mount for easy installation
• Metal case design
• Compliant with IP30 standard

• 1 X GigaPort Industrial Grade VDSL2 Ethernet Bridge Modem (NV-520G)
• 1 X User Manual Download Link (via email)
• 1 X DIN-Rail mounting plate
• 2 X Screws
• Protective caps (1 X Console, 1 X RJ-11, 3 X RJ-45)
• 1 X 6 pin Terminal Block
• 1 X 2 pin Terminal Block

• RJ-45 (Ethernet): Category 3~6 UTP/STP
• RJ-11/Terminal Block (VDSL2): Twisted Pair phone or network grade cable

• 1 x Power LED
• 4 x Link/Active Status for Ethernet port
• 1 x Link LED for VDSL2 (Line) Port
• 1 x CO Mode indicator LED
• 1 x CPE Mode indicator LED

• 1 X Removable 6-contact terminal block for Power1 and alarm contact
• 1 X Removable 2-contact terminal block for Power2

• Discrete multitone (DMT) modulation

• Packet Transfer Mode (PTM)

• Redundant dual DC input power 15~48V (Removable Terminal Block)

• 6W

• 6.7" x 4.76" x 1.37" (170 x 121 x 35mm)

• 2 lbs. (0.907 Kg)

• Input Voltage: 15 to 48VDC

• -4 to 158°F (-20 to 70°C)

• -40 to 185°F (-40 to 85°C)

• 5% to 95% Non-Condensing

• CE, FCC Class A, RoHS

• 2 years (parts only)