Managed VDSL2 Modem (CO or CPE selectable) - NV-700L

• Managed Network Component: A single VDSL2 modem designed for high-speed Ethernet extension with advanced management and monitoring.
• Point-to-Point Requirement: Must be used with a compatible partner device (minimum of two units required) to establish a network link.
• Selectable CO/CPE Modes: User-configurable via the web interface to act as either the CO (Master) or CPE (Remote) unit.
• High-Speed Performance: Delivers aggregate line speeds up to 200Mbps (100Mbps symmetric) at distances up to 1,000 feet.
• Extended Reach: Supports operating distances up to 10,826 feet (3.3km) over a single twisted pair of copper.
• Line Connections & Infrastructure: Features an integrated RJ-11 Line Port and 2-pin Terminal Block for use over existing phone lines or twisted-pair network cable (Cat5, Cat6, or Cat7).
• Advanced Management: Features a web-based interface for remote monitoring, IP address assignment, static routing (IPv4/IPv6), and selectable VDSL2 band profiles.
• Integrated Connectivity: Features four (4) 10/100Mbps auto-sensing Ethernet ports and an on-board POTS/ISDN splitter.

The Netsys NV-700L Managed VDSL2 Ethernet Extender is a high-performance component for point-to-point applications requiring granular network control. By utilizing VDSL2 technology, the NV-700L establishes a stable ethernet bridge over existing copper infrastructure, offering a cost-effective alternative to fiber optic installations. As this is a single component, a minimum of two (2) units or a compatible Netsys VDSL2 partner device is required to establish a link.

For a pre-configured, ready-to-use solution, please see the NV-700EKIT Managed VDSL2 Kit. For users seeking a network-transparent, plug-and-play solution without a management interface, we recommend the NV-202GEKIT.

The NV-700L provides the flexibility to be configured as either a CO (Central Office) or CPE (Customer Premises Equipment) unit via its web-based management tool. This interface allows administrators to manage and monitor the device remotely, configure static routing, and select from eight VDSL2 band profiles to optimize the link for the specific environment. Each unit features four 10/100Mbps Ethernet ports and integrated surge protection, making it a reliable choice for extending network services in campus, hospitality, and MDU environments.

• ARM Cortex A9 dual-core processor
• Supports G.998.4 G.INP
• Supports up to 100 Mbps symmetric
• Supports 8 VDSL band profiles
• Supports USB 2.0 for connecting USB Dongle
• Supports IPv4/IPv6 NTP Client
• Supports static routing for IPv4 and IPv6 forwarding
• Mac Address based filtering
• Web-based management
• Supports IGMP snooping v2/v3
• Compliant with IEEE 802.3 & 802.3u Ethernet Standard
• Supports VLAN Tag pass through
• Compliant with ITU-T G993.2 VDSL2 standard
• Supports 8 queue MFC/DSCP both type QoS
• Supports HTTP/HTTPS web management
• Supports SSL / SSH security
• Supports remote management and monitor
• Supports configuration backup and restore
• On board surge protection for Line port
• Supports CO side bridge mode
• Supports Dual Firmware Image Backup
• Supports SNMP v1/v2
• On board POTS/ISDN splitter
• Supports TR-069

Package Contents

• 1 X NV-700L VDSL2 Modem
• 1 X AC to DC Power Supply
• 1 X RJ-11 Patch Cable
• 1 X RJ-45 Patch Cable
• 1 X User Guide Download Link

Cable Connections

• 4 x RJ-45 10/100Mbps auto-negotiation Ethernet port
• 1 x RJ-11 / Terminal block combo for VDSL2 line port
• 1 x RJ-11 connector for POTS/ISDN device
• 1 x Reset Button for resetting to factory default

LED Indicators

• 1 x Power LED
• 4 x Link/Active Status for Ethernet port
• 1 x Link LED for VDSL2 line port
• 1 x USB LED

Switch Method

• Store and forward

Flow Control

• Full duplex: IEEE 802.3x
• Half duplex: Back pressure

Typical Power Consumption

• 4.4 W (Full load)

Power Supply

• External switching power adapter (Input: AC 85~240 Volts/50~60Hz, Output: DC 12V/1A)

Operating Temperature

• 0°C ~ 50°C (32°F ~ 122°F)

Storage Temperature

• -20°C ~ 70°C (-4°F ~ 158°F)

Humidity

• 10 to 90% (non-condensing)

Dimensions

• 184 x 146 x 40 mm (7.2" x 5.74 " x 1.57")

Shipping Weight

• 2 lbs (0.9 kg)

Warranty

• 2 years (parts only)