Managed VDSL2 Ethernet Extender Kit (200Mbps) - NV-700EKIT

• Managed Point-to-Point Kit: Includes two (2) NV-700L units to establish a high-speed Ethernet bridge with advanced management and monitoring capabilities.
• Unmanaged Alternative: For users seeking a network-transparent, plug-and-play solution without a management interface, see the NV-202GEKIT.
• Pre-Configured for Deployment: Units are pre-configured in CO (Master) and CPE (Remote) modes for immediate operation out of the box.
• VDSL2 Performance: Delivers aggregate line speeds up to 200Mbps (100Mbps symmetric) at distances up to 1,000 feet.
• Extended Reach: Supports operating distances up to 10,826 feet (3.3km) over a single twisted pair of copper.
• Line Connections & Infrastructure: Features an integrated RJ-11 Line Port and 2-pin Terminal Block for use over existing phone lines or twisted-pair network cable (Cat5, Cat6, or Cat7).
• Advanced Management: Features a web-based interface for remote monitoring, IP address assignment, static routing (IPv4/IPv6), and eight selectable VDSL2 band profiles.
• Integrated Connectivity: Each unit features four (4) 10/100Mbps auto-sensing Ethernet ports and an on-board POTS/ISDN splitter.

The Netsys NV-700EKIT Managed VDSL2 Ethernet Extender Kit is a high-performance solution for point-to-point applications that require granular network control and monitoring. Utilizing VDSL2 technology, the NV-700EKIT provides a stable ethernet bridge over existing copper infrastructure, offering a cost-effective alternative to fiber optic installations in campus, hospitality, and MDU environments.

The NV-700EKIT includes everything needed to establish a high-speed link over a single twisted pair (2 wires) of network-grade cable (Cat5, Cat6, Cat7) or pre-existing phone lines. One NV-700L is pre-configured in CO mode for the central office or wiring closet, while the second unit is pre-configured in CPE mode for the remote location. Each unit includes four 10/100Mbps Ethernet ports to connect multiple devices such as IP cameras, wireless access points, or smart TVs.

Unlike unmanaged solutions, the NV-700EKIT provides a comprehensive web-based management tool. This allows administrators to manage and monitor devices remotely, configure static routing, and choose from eight selectable VDSL2 modes to tailor the link to the specific environment. Housed in a durable chassis with integrated surge protection and a simple RJ-11 or terminal block interface, the NV-700EKIT is a premier choice for managed network expansion.

• ARM Cortex A9 dual-core processor
• Supports G.998.4 G.INP
• Supports up to 100 Mbps symmetric
• Supports 8 VDSL band profiles
• Supports USB 2.0 for connecting USB Dongle
• Supports IPv4/IPv6 NTP Client
• Supports static routing for IPv4 and IPv6 forwarding
• Mac Address based filtering
• Web-based management
• Supports IGMP snooping v2/v3
• Compliant with IEEE 802.3 & 802.3u Ethernet Standard
• Supports VLAN Tag pass through
• Compliant with ITU-T G993.2 VDSL2 standard
• Supports 8 queue MFC/DSCP both type QoS
• Supports HTTP/HTTPS web management
• Supports SSL / SSH security
• Supports remote management and monitor
• Supports configuration backup and restore
• On board surge protection for Line port
• Supports CO side bridge mode
• Supports Dual Firmware Image Backup
• Supports SNMP v1/v2
• On board POTS/ISDN splitter
• Supports TR-069

Product Kit Contents

• 2 X NV-700L VDSL2 Modems
• 2 X AC to DC Power Supply
• 2 X RJ-11 Patch Cable
• 2 X RJ-45 Patch Cable
• 1 X User Guide Download Link

Cable Connections

• 4 x RJ-45 10/100Mbps auto-negotiation Ethernet port
• 1 x RJ-11 / Terminal block combo for VDSL2 line port
• 1 x RJ-11 connector for POTS/ISDN device
• 1 x Reset Button for resetting to factory default

LED Indicators

• 1 x Power LED
• 4 x Link/Active Status for Ethernet port
• 1 x Link LED for VDSL2 line port
• 1 x USB LED

Switch Method

• Store and forward

Flow Control

• Full duplex: IEEE 802.3x
• Half duplex: Back pressure

Typical Power Consumption

• 4.4 W (Full load)

Power Supply

• External switching power adapter (Input: AC 85~240 Volts/50~60Hz, Output: DC 12V/1A)

Operating Temperature

• 0°C ~ 50°C (32°F ~ 122°F)

Storage Temperature

• -20°C ~ 70°C (-4°F ~ 158°F)

Humidity

• 10 to 90% (non-condensing)

Dimensions (each unit)

• 184 x 146 x 40 mm (7.2" x 5.74 " x 1.57")

Shipping Weight

• 4 lbs (1.8 kg)

Warranty

• 2 years (parts only)