Kit - VDSL2 Ethernet Extender with Remote Power - NV-202RPEKIT


Price $550.00 $495.00 Online Sales Price

  • Product Details


The NV-202RPEKIT VDSL2 Ethernet Extender with Remote Power delivers power and Ethernet IP connectivity to attached PoE devices at distances up to 6,562ft (2km) using a single twisted-pair of copper network or phone grade cable. The NV-202RPEKIT includes one (1) powered NV-202M master unit and one (1) remotely powered NV-202S end point. A single 48V power supply provides power to the NV-202M unit, which then passes power to the NV-202S end point over the single twisted pair of network-grade phone line. The same twisted pair carries Ethernet data using innovative Power over VDSL transmission techniques, making it the ideal Ethernet extender solution for deploying Ethernet over long distances exceeding the natural limitations of network cable where electricity is limited or unavailable at the remote end. The NV-202RPEKIT ensures reliable delivery of essential power and data to and from remote locations using automatic fault protection and power monitoring. The remotely powered NV-202S end point provides a power budget of up to 15 Watts through the PoE port to the attached device, providing a flexible Ethernet extender solution for even the most challenging network installations.


The NV-202M Master unit and 48V power supply are typically located at the central site and connect to your router or switch and power source. The long twisted-pair phone or network grade cable (up to 6,562 feet) connects from the RJ-11 or 2-pin terminal block line port on the NV-202M to the RJ-11 or 2-pin terminal block line port on the NV-202S end point at the remote location. The Ethernet PoE port on the NV-202S then connects to the attached PoE device. The NV-202M unit automatically determines the line speed based on line conditions and can range from 100Mbps symmetrical up to 984 feet to 7.2Mbps downstream/.5Mbps upstream up to 6,562 feet. The power budget of the PoE port ranges from 15.0W up to 984 feet to 7.0W up to 6,562 feet. Since the power budget of the NV-202S PoE port is based on distance, the power (Watts) required for attached PoE devices should be confirmed and compared to the above chart before selecting this product. The NV-202RPEKIT also supports OVP (Over Voltage Protection), OCP (Over Current Protection), OTP (Over Temperature Protection) and robust short-circuit protection and surge protection.

Configured for plug and play operation right out of the box, the simple to install and use NV-202RPEKIT VDSL2 Ethernet Extender Kit with Remote Power is the perfect solution for network security cameras, wireless access points, security / RFID scanners, access control systems, and just about any challenging network application requiring a point-to-point Ethernet network connection over extended distances (up to 6,562 feet) when electricity is not available at the remote equipment location.



• Compliant with IEEE802.3, IEEE802.3u, IEEE 802.3 at PoE, ITU-G993.2 VDSL2 standards
• Supports auto speed for Line port
• Support long reach mode up to 6,562ft (2km) / 7w power budget
• Supports Surge protection for line port
• Support OVP / OCP / OTP power protection and revise polarity auto adjustment
• Supports 1 x RJ-11/Terminal block for VDSL line port using single pair of network or phone grade phone cable
• Supports 1 x RJ-45 10/100 Ethernet port (NV-202M)
• Supports 1 x RJ-45 10/100 Ethernet port with PoE (NV-202S only)
• Supports DIP switch configuration of CO/CPE mode, Frequency (High Band/Low Band), SNRM (9bd/6db), and Interleave delay setting (8ms, INP=2 / 1ms, INP=0)
• Supports long packet size up to 1536 bytes
• Data and Remote Power work on the same single pair of network grade cable or phone line
• Spectral compatibility with xDSL (2B1Q/4B3T)
• Supports wall mounting


Technical Specifications

Product Kit Contents
  • 1 X NV-202M Master
  • 1 X NV-202S End Point
  • 8 X Rubber Feet
  • 1 X 48V / 1.875A Desktop Switching Power Adapter with power cord
  • 2 X Straight-through Ethernet Cables

Cable Connections
  • 1 X RJ-45 (Ethernet) w/PoE: Cat. 5 or above UTP/STP
  • 1 X RJ-11 (VDSL2): Cat.3 24AWG with twisted Pair network or phone grade cable
  • 1 X Terminal Block (VDSL2): Cat.3 24AWG with twisted Pair network or phone grade cable
LED Indicators
  • 1 x Power LED
  • 2 x Link/Active Status for Ethernet port
  • 1 x Link LED for VDSL2 line port
  • 1 x CO Mode indicator LED
  • 1 x CPE Mode indicator LED
VDSL2 Line Code
  • Discrete multitone (DMT) modulation
VDSL2 Transmission Mode
  • Packet Transfer Mode (PTM)
Typical Power Consumption
  • 5 W
Power Requirement: Input Voltage
  • 48VDC / 1.875A Power Adapter
Operating Temperature
  • 0°C ~ 50°C (32°F ~ 122°F)
  • Fanless, free air cooling
Storage Temperature
  • -20°C ~ 70°C (-4°F ~158°F)
  • 10% to 90% (non-condensing)
Mounting Method
  • Supports DIN-Rail mount installation
  • Supports wall mounting
  • NV-202M: 169mm x 122mm x 35mm (6.65" x 4.8" x 1.38”)

  • NV-202S: 169mm x 115mm x 35mm (6.65" x 4.53" x 1.38”)

Shipping Weight (Kit)
  • 7 lbs. (3.175 Kg)
Power Requirements
  • Input Voltage: 48VDC / 1.875A Power Adapter
Agency Compliance
  • FCC Class A, CE
  • RoHS compliant
  • 2 years (parts only)


All Categories



Sold Out