Kit - VDSL2 Ethernet Extender (Over Coax or Twisted-Pair) with Remote Kit - VDSL2 Ethernet Extender (Over Coax or Twisted-Pair) with Remote – Kit - VDSL2 Ethernet Extender (Over Coax or Twisted-Pair) with Remote

Kit - VDSL2 Ethernet Extender (Over Coax or Twisted-Pair) with Remote Power & PoE - NV-202RPCEKIT


Price $500.00 $450.00 Online Sales Price

  • Product Details


The NV-202RPCEKIT VDSL2 Ethernet Extender (Over Coax or Twisted-Pair) with Remote Power & PoE delivers power and Ethernet IP connectivity to attached PoE devices at distances up to 6,562ft (2km) using a single twisted-pair of copper network or phone grade cable, while offering the flexibility of utilizing coaxial cable in place of network or phone cable (up to 3,608ft). The NV-202RPCEKIT includes one (1) powered NV-202MC master unit and one (1) remotely powered NV-202SC end point. A single 48V power supply provides power to the NV-202MC unit, which then passes power to the NV-202SC end point over the single twisted pair of phone or network-grade cable, or coaxial cable. The same twisted pair, or coaxial cable, carries both power and Ethernet data using innovative Power over VDSL transmission techniques, making it the ideal Ethernet extender solution for deploying Ethernet over long distances exceeding the natural limitations of network cable where electricity is limited or unavailable at the remote end. The NV-202RPCEKIT ensures reliable delivery of essential power and data to and from remote locations using automatic fault protection and power monitoring. The remotely powered NV-202SC end point provides a power budget of up to 15 Watts through the PoE port to the attached device, providing a flexible Ethernet extender solution for even the most challenging network installations.

The NV-202MC Master unit and 48V power supply are typically located at the central site and connect to your router or switch and power source. For VDSL2 applications, the long twisted-pair phone or network grade cable (up to 6,562 feet), connects from the 2-pin terminal block line port ( for twisted-pair copper) on the NV-202MC to the 2-pin terminal block line port on the NV-202SC end point at the remote location. For applications utilizing coaxial cable, the coaxial cable (up to 3,608 feet) connects to the F-connector line port on the NV-202MC and NV-202SC. The Ethernet PoE port on the NV-202SC then connects to the attached PoE device. The NV-202MC unit automatically determines the line speed based on line conditions and can range from 100Mbps symmetrical to 7.2Mbps downstream/.5Mbps upstream. The power budget of the PoE port ranges from 15.0W to 7.0W. (See the above performance table for more details.) Since the power budget of the NV-202SC PoE port is based on distance, the power (Watts) required for attached PoE devices should be confirmed and compared to the above chart before selecting this product. The NV-202RPCEKIT also supports OVP (Over Voltage Protection), OCP (Over Current Protection), OTP (Over Temperature Protection) and robust short-circuit protection and surge protection.

Configured for plug and play operation right out of the box, the simple to install and use NV-202RPCEKIT VDSL2 Ethernet Extender Kit with Remote Power is the perfect solution for network security cameras, wireless access points, security / RFID scanners, access control systems, and just about any challenging network application requiring a point-to-point Ethernet network connection over extended distances (up to 6,562 feet) when electricity is not available at the remote equipment location.


    • Compliant with IEEE802.3, IEEE802.3u, IEEE 802.3 at PoE, ITU-G993.2 VDSL2 standards
    • Supports auto speed for Line port
    • Supports long reach mode up to 6,562ft (2km) / 7w power budget
    • Supports Surge protection for line port
    • Support OVP / OCP / OTP power protection and reverse polarity auto adjustment
    • Supports 1 x 2-pin terminal block VDSL line port for single twisted-pair of network or phone grade phone cable
    • Supports F-connector line port for coaxial cable
    • Supports 1 x RJ-45 10/100 Ethernet port (NV-202MC)
    • Supports 1 x RJ-45 10/100 Ethernet port with PoE (NV-202SC only)
    • Supports DIP switch configuration of CO/CPE mode, Frequency (High Band/Low Band), SNRM (9bd/6db), and Interleave delay setting (8ms, INP=2 / 1ms, INP=0)
    • Supports long packet size up to 1536 bytes
    • Data and Remote Power work on the same single pair of network grade cable or phone line
    • Spectral compatibility with xDSL (2B1Q/4B3T)
    • Supports wall mounting

Technical Specifications

Product Kit Contents
    • 1 X NV-202MC Master
    • 1 X NV-202SC End Point
    • 8 X Rubber Feet
    • 1 X 48V / 1.875A Desktop Switching Power Adapter with power cord
    • 2 X Straight-through Ethernet Cables
Cable Connections
    • 1 X RJ-45 (Ethernet) w/PoE: Cat. 5 or above UTP/STP
    • 1 X F-Type Female coaxial connector
    • 1 X Terminal Block (VDSL2):for single-twisted pair network or phone grade cable
LED Indicators
    • 1 x Power LED
    • 2 x Link/Active Status for Ethernet port
    • 1 x Link LED for VDSL2 line port
    • 1 x CO Mode indicator LED
    • 1 x CPE Mode indicator LED
VDSL2 Line Code
    • Discrete multitone (DMT) modulation
VDSL2 Transmission Mode
    • Packet Transfer Mode (PTM)
Typical Power Consumption
    • 5 W
Power Requirement: Input Voltage
    • 48VDC / 1.875A Power Adapter
Operating Temperature
    • 0°C ~ 50°C (32°F ~ 122°F)
    • Fanless, free air cooling
Storage Temperature
    • -20°C ~ 70°C (-4°F ~158°F)
    • 10% to 90% (non-condensing)
Mounting Method
    • Supports DIN-Rail mount installation
    • Supports wall mounting
    • NV-202MC: 169mm x 122mm x 35mm (6.65" x 4.8" x 1.38”)
    • NV-202SC: 169mm x 115mm x 35mm (6.65" x 4.53" x 1.38”)
Shipping Weight
    • 7 lbs. (3.175 Kg)
Agency Compliance
    • FCC Class A, CE
    • RoHS compliant
    • 2 years (parts only)

All Categories

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question


Sold Out