Kit - HyperXtender PoE Ethernet Extender - NP-400POEKIT

Netsys

Price $825.00 $742.50 Online Sales Price

  • Product Details

Description

The Netsys HyperXtender PoE Ethernet Extender Kit (NP-400POEKIT) is the ultimate solution for long-range Ethernet extension applications where Power over Ethernet is required, designed to extend the reach of Ethernet data and IEEE 802.3at Power over Ethernet beyond its natural limitations of 328 feet (100m) over network-grade twisted-pair phone line, network cable, or coax cable, and is capable of transmitting data and power over the same twisted pair or coax cable. The NP-400POEKIT comes with one NVP-400SE Local Unit (CO), which is located at the central site and one NVP-400PD Remote Unit (CPE) which is placed at the remote location requiring a data connection and Power over Ethernet. The NP-400POEKIT transmits data and power over a single twisted-pair of network-grade phone cable or network cable up to 3,937 feet (1,200m) or coaxial cable up to 5,905 feet (1,800m). Without the need for a local power supply, each NVP-400PD is equipped with four 10/100Base-TX IEEE 802.3at POE Ports for total power budget of 30W that can support any remote IEEE 802.3at/af powered device (PD), including Wi-Fi Access Points, IP phones, and IP Cameras. The NP-400POEKIT enables centralized management of the power supply from a single location for easy, efficient, and cost- effective installations. The Netsys HyperXtender PoE Ethernet Extender Kit is an ideal Plug and Play PoE Ethernet extension solution for deploying networking applications in areas that requiring power and data, in a simple, cost-effective solution.

Speed vs. Distance (25K-30Mhz Spectrum - Low Band)

Features

  • NO CONFIGURATION REQUIRED
  • Complies to IEEEE 802.3at POE Industrial-Grade Extenders for applications in harsh environment
  • Simultaneous transmission of Ethernet data and POE Power over twisted pair phone line or coaxial cable
  • Eliminates the need for local power supply at remote sites
  • Easy cabling for quick installation
  • Quick deployment and easy maintenance
  • Flexible and efficient power management
  • Automatically switch between VDSL2 Profile 30a and 17a to utilize bandwidth performance
  • Dip Switch to enable local power supply and provide full 30W to each of the four POE ports.
  • Power Supplies Sold Separately
  •  

    Technical Specifications

    Product Kit Contents:
    • 1 X NP-400SE Local unit
    • 1 X NP-400PD Remote Unit
    • 1 X User Manual download lnk
    • 2 X Straight-through Ethernet Cables
    • 2 X RJ-11 Cables

    Hardware Interface:
  • Terminal Block for Copper Port
  • BNC Female connector for Coaxial Port
  • 4 X RJ-45 10/100 Base-TX IEEE 802.3 at POE Port

  • 3 Position Dip Switch:
  • Selectable target band plan (Asymmetrical or Symmetrical )
  • Selectable target SNR margin (6dB or 9dB)
  • Selectable Remote Power (ON) or Local Power (OFF)

  • LED Indicators:
  • Active: System Status
  • LPWR/RPWR: Local Power/Remote Power
  • POE: POE Port Status
  • Available POE Output (Watts): 5/15/30
  • Line Speed(Mbps): Link/20/40/60/80/100

  • Power Supply:
  • Terminal blocks for redundant DC power inputs
  • DIN connector for external AC to DC adapter
  • Input Voltage: 48 to 57 VDC
  • Power Consumption 65 Watts maximum
  • overcurrent protection
  • Automatic short protection

  • Standards Support:
  • VDSL2 ITU-T G.933.2
  • VDSL2 Profiles: 17a and 30a

  • Protocol Support:
  • Transparent bridging to higher layer protocols

  • Operating Environment:
  • Operating Temperature: -40°F to 167°F (-40°C to 40°C)
  • Operating Temperature: -40°F to 185°F (-40°C to 85°C)
  • Humidity: 10% - 95% (non-condensing)

  • Physical:
  • Hardened aluminum case, IP30
  • Dimensions: 2.4” x 5.3” x 4.2” (62 x 135 x 106.5 mm)
  • Installation: DIN-Rail, Panel Rack Mounting

  • Regulatory Compliance:
  • CE
  • FCC Part 15, Class B
  • EN60950
  • All Categories

    Sale

    Unavailable

    Sold Out