HyperXtender ER Ethernet Extender Kit (200Mbps) - NV-202EKIT

NetsysSKU: NV-202EKIT

Sale price$275.00 Regular price$305.00



For the latest model, check out the NEW GigaPort VDSL2 Ethernet Extender Kit (NV-202GEKIT) NOW AVAILABLE!

The Netsys HyperXtender ER Ethernet Extender Kit (NV-202EKIT) includes everything needed to quickly deploy one high-speed point-to-point Ethernet extender over long distances and is great for delivering video, data, and voice services and connecting remotely located wireless access points and other network devices, satellite buildings, and back-haul applications to name a few. The NV-202EKIT HyperXtender Ethernet Extender Kit can utilize existing phone lines or any network-grade twisted pair cable and only require one (1) twisted pair (2 wires) to operate. The Ethernet HyperXtender ER Solution saves you time and money by eliminating expense and hassle of fiber cable and equipment, leased line, and other data line services.

The NV-202EKIT comes with two (2) NV-202 VDSL2 Ethernet Bridge Modems pre-configured for plug and play right out of the box for distances up to 10,000 feet (3 km) at an auto-configured bandwidth of 5.04Mbps downstream and 1.48Mbps upstream, or line speeds up to 100Mbps symmetrical at distances up to 1,000 feet (0.3 km), which is more than perfect for most applications. The bandwidth usage is automatically optimized to achieve the best speeds possible based on the surrounding environment, and there is no configuration required. The HyperXtender ER Ethernet Extender Solution also features the ability to extend telephone (POTS/ISDN/PBX) service over the same 2 wires by utilizing external filters (sold separately).

The HyperXtender ER Ethernet Extender Kit (NV-202EKIT) is simple to install and use. The NV-202 configured as CO/Local is typically located in the Central Office, Computer Room, or Wiring Closet, with a router or switch connected to one of its RJ-45 Ethernet ports (LAN1 or LAN2). The NV-202 configured as CPE/Remote will be located at the destination point, with the appropriate network device/s (PC, WAP, IP camera, etc.) connected to the RJ-45 Ethernet port/s (LAN1 and/or LAN2). Next, connect one (1) twisted-pair of phone or network grade cable to the Line port of each unit using either the RJ-11 Jack, or terminal block on the front of the NV-202E. Last, the Local and Remote Units are connected to the AC power source and the link is established automatically on power up. Once the link is established, the link speed auto-configures to the optimum speed based on the surrounding environment to speeds of up to 100Mbps symmetrical.

The Netsys HyperXtender ER Ethernet Extender Kit can be used to connect any Ethernet based device anytime the length of a network connection exceeds the 328 feet (100m) distance limitation or when installing network cabling is impractical or cost prohibitive.



    • Plug and play kit for one cost-effective point-to-point Ethernet extension up to 10,000 feet (3 km) over existing phone lines or network cable

    • Ideal for remotely located Wireless Access Points

    • RJ-11/Terminal Block combo for Line port.

    • Supports high bandwidth up to 100Mbps symmetrical (200Mbps aggregate)

    • Supports long reach mode up to 10,000 feet (3 km) with 24 gauge twisted-pair phone wire

    • Supports auto speed for Line port and Interleave mode selectable through CO side DIP switch

    • DIP switch for selecting CO and CPE modes

    • Supports long packet size up to 1536 bytes

    • Built-In Surge protection

    • Wall mountable

    • 2 X Auto-sensing 10/100 Mbps Ethernet port with Auto MDIX

    • RoHS compliant

    • Compact desktop design

    • 802.3 Ethernet

    • 802.3u Fast Ethernet

    • 802.3x Flow Control

Technical Specifications

Product Kit Contents
    • 2 X VDSL2 Ethernet Bridge Modem (NV-202)
    • 1 X User Manual Download Hyperlink
    • 8 X Plastic Feet
    • 2 X AC to DC Power Adapter
    • 2 X Straight-through Ethernet Cables
    • 2 X RJ-11 Cables
Cable Connections
    • RJ-45 (Ethernet): Category 3~6 UTP/STP
    • RJ-11/Terminal BLock (VDSL2): Twisted Pair phone or network grade cable
LED Indicators
    • 1 x Power LED
    • 2 x Link/Active Status for Ethernet port
    • 1 x Link LED for VDSL2 (Line) Port
    • 1 x CO Mode indicator LED
    • 1 x CPE Mode indicator LED
VDSL2 Line Code
    • Discrete multitone (DMT) modulation
VDSL2 Transmission Mode
    • Packet Transfer Mode (PTM)
Typical Power Consumption
    • 5 W
Power Requirement: Input Voltage
    • 12VDC / 1A (Commercial-grade Power Adapter)
    • EMI Compliant: FCC class A
    • EMS Compliant: CE mark
Operating Temperature
    • 32°F ~ 122°F(0°C ~ 50°C)
    • Fanless, free air cooling
Storage Temperature
    • -4°F ~158°F (20°C ~ 70°C)
    • 10% to 90% (non-condensing)
Mounting Method
    • Desktop or Under Counter
    • 3.74" X 4.33" X 1.06” (95 mm X 110 mm X 27 mm) (Each Unit)
Shipping Weight
    • 3 lbs. (1.361 Kg)
Power Requirements
    • External Switching Power Adapter
    • (Input: 85-240VAC, 50/60Hz Output: 12V/1A)
Agency Compliance
    • FCC Part 15 Class A, CE
    • RoHS compliant
    • 2 years (parts only)

You may also like

Recently viewed