Description
Description
The Netsys 4-Pair G.SHDSL.bis Ethernet Extender Kit (3040EKIT) provides the ultimate long-range solution for point-to-point Ethernet connections up to 22,000 feet (6.7 km) and speeds up to 61.184Mbps symmetrical (122Mbps aggregate) over 4 bonded pairs of existing phone or network cable. The kit includes two Netsys 3040E modems configured for plug-and-play operation.
The 3040EKIT is simple to install and use, with no configuration required in default mode. One 3040E G.SHDSL.bis modem is pre-configured as the Local Unit, while the other is pre-configured as the Remote Unit. The Local Unit is typically located at the origination point, connected to a router/switch via the LAN port, with the Remote Unit at the remote location, connected to the remote network device (NIC, router, switch, etc.) via the LAN port. Next, 4 twisted pairs (8 wires) of network or phone grade cable (up to 22,000 feet/6.7 km), is connected to the DSL port of each 3020E. Last, both units are connected to the AC power source and the link is established automatically.
Features
- Maximum Transmission Distance of 22,000 feet (6.7 km)
- Maximum Data Rate of 61.184Mbps (122Mbps aggregate)
- ITU-T Rec. G.991.2 G.SHDSL.bis Compliance
- G.SHDSL Trellis Coded Pulse Amplitude Modulation (TCPAM) Line Code
- Ethernet Auto-Negotiation for 10/100 BaseT
- Compact desktop design
- 802.3 Ethernet
- 802.3u Fast Ethernet
- 802.3x Flow Control
- Support both EFM mode and ATM mode (Optional)
- Flexible and Rapid Service Deployment
- Flexible configuration as CPE or CO
- Support EFM OAM complying IEEE 802.3ah
- Low Delay, Jitter and Packet Loss for delay sensitive applications
- Comprehensive and easy OAM & P functions in provisioning and management
- QoS feature for guaranteed Ethernet service
- Future-proof Ethernet traffic management and QoS features
Technical Specifications
Product Kit Contents- 2 X 3040E G.SHDSL.bis Ethernet Extenders
- 1 X User Guide Download Hyperlink
- 2 X AC to DC Power Adapter
- LAN
- 4 –port switching hub
- 10/100BASE-T auto-negotiation & sensing
- Auto MDI/MDI-X
- WAN
- ITU-T G.991.2.(2004)
- 2BASE-TL
- EFM bonding (IEEE 802.3ah PAF)
- N x 64 Kpbs (N=3~89) using TC-PAM 16/32
- Max. 22.784 Mbps (4-Pair)
- N x 64 Kbps (N=3~213) using TC-PAM 64/128
- Max. 61.184 Mbps (4-Pair)
- Support of Annex A , Annex B , Annex AF & Annex BG
- Support TC-PAM 16/32/64/128
- Impedance: 135 ohms
- 802.1d Transparent Bridging
- Up to 2K MAC Address learning bridge
- WAN(DSL): RJ-45 x 1
- LAN: RJ-45 x 4
- Management Port: RJ45 x 1
- Console Port: RJ45 x 1
- Reset Button: Load Factory Default
- DC Power Jack x 1
- LAN: Link/Act, 10/100 per port
- WAN: Link per loop
- System: Power, Alarm, MGMT
- Easy to use web-based GUI for quick setup, configuration and management
- Menu-driven interface/Command line interface (CLI) for local console and telnet access
- Password protected management and access control list for administration
- SNMP v1/v2 (RFC1157/1901/1905) agent and MIB II
- (RFC1213/1493)
- EFM OAM (IEEE 802.3ah)
- Software upgrade via web-browser/TFTP
- IEEE 802.1q VLAN Tagging
- Port Based VLAN
- Up to 8 802.1q VLANs(ID Range 1 ~ 4094)
- VLAN Stacking (Q-in-Q)
- QoS Support
- Rate limiting by rule-based/port-based
- Traffic classification based on port/802.1p/ DSCP
- WRR (Weighted Round Robin)/ SPQ (Strict Priority Queuing) scheduling algorithm
- Operating Temperature: -20℃ ~ +60℃
- Storage Temperature: -20℃ ~ +85℃
- Relative Humidity: 98%, non-condensing
- ISO 9001 Quality Management
- CE Approval & EN60950 Certificate
- Dimension (mm): 195 x 48 x 168
- AC Power Adapter (100~240VAC with 50~60Hz)
- Weight: 5 lbs.
- 2MB Flash Memory, 4MB SDRAM