HyperXtender ER Ethernet Extender - NV-202E

HyperXtender ER Ethernet Extender - NV-202E


Price $162.50 $146.25 Online Sales Price

  • Product Details



The Netsys Ethernet HyperXtender ER Ethernet Extender (NV-202E) provides a cost effective remote unit for the NV-800HE HyperExtender ER 8-Port Ethernet Extender, NV-2400HE HyperExtender GT 24-Port Ethernet Extender, and is part of the Ethernet HyperXtender ER Ethernet Extender Kit (NV-202EKIT). The NV-202E features auto-configuring speeds up to 100Mbps symmetrical (up to 1,000 feet, with speeds dropping off asymmetrically from there), automatically optimized based on the quality of the line and the distance with a maximum distance of 10,000' (3 km) over existing twisted-pair phone line or network cable, and can be confirgured as a CPE or CO modem using the DIP switches on the unit.

The Ethernet HyperXtender ER Ethernet Extender comes ready to plug and play out of the box for distances up to 10,000 feet (3 km) at an auto-configured bandwidth of 5.04Mbps downstream and 1.48Mbps upstream, or line speeds up to 100Mbps symmetrical at distances up to 1,000 feet (0.3 km), which is more than perfect for most applications. The bandwidth usage is automatically optimized to achieve the best speeds possible based on the surrounding environment, and there is no configuration required. The HyperXtender ER Ethernet Extender Solution also features the ability to extend telephone (POTS/ISDN/PBX) service over the same 2 wires and utilizing external filters (sold separately). With the NV-80E HyperXtender Managed Switch, each link can be set to pre-configured speeds by using the unique bandwidth management features.

The HyperXtender ER Ethernet Extender is typically placed at the remote network device location and can be mounted on a desktop or under the counter. One of the NV-202E’s two RJ-45 Ethernet ports connect to a NIC, hub, switch, or other network device. Next, the Line port of the NV-202E is connected to the RJ-11 telephone jack of the 2-wire twisted pair phone line (or network cable) connection extending (up to 10,000 feet/3 km) from the central location. Last, the NV-800HE, NV-2400HE, or a second NV-202E configured as a CO modem is installed and all equipment is connected to the AC power source and the link is established automatically on power up. The speed of the link will automatically configure itself based on the distance and quality of the line, with a maximum speed of 100Mbps symmetrical at distances up to 1,000' and a maximum distance of 10,000' at speeds of 5.04Mbps downstream and 1.48Mbps upstream. No configuration is required.

The Ethernet HyperXtender ER NV-202E provides a complete and cost-effective remote unit solution for Netsys’ full-featured HyperXtender Managed Ethernet Switches and the popular NV-202EKIT Ethernet HyperXtender ER Ethernet Extender Kit.

Speed vs. Distance (25K-30Mhz Spectrum - Low Band)


  • Plug and play, cost-effective Ethernet extension up to 10,000 feet (3 km) over existing phone lines or network cable
  • Ideal for remotely located Wireless Access Points
  • RJ-11/Terminal Block combo for Line port.
  • Supports high bandwidth up to 100Mbps symmetrical
  • Supports long reach mode up to 10,000 feet (3 km) with 24 gauge twisted-pair phone wire
  • Supports auto speed for Line port and Interleave mode selectable through CO side DIP switch
  • DIP switch for selecting CO and CPE modes
  • Supports long packet size up to 1536 bytes
  • Built-In Surge protection
  • Wall mountable
  • 2 X Auto-sensing 10/100 Mbps Ethernet port with Auto MDIX
  • RoHS compliant
  • Compact desktop design
  • 802.3 Ethernet
  • 802.3u Fast Ethernet
  • 802.3x Flow Control

    Technical Specifications

    Product Kit Contents
    • 1 X HyperXtender ER Ethernet Extender (NV-202E)
    • 1 X User Manual CD
    • 4 X Plastic Feet
    • 1 X AC to DC Power Adapter
    • 1 X Straight-through Ethernet Cables
    • 1 X RJ-11 Cables
    Cable Connections
    • RJ-45 (Ethernet): Category 3~6 UTP/STP
    • RJ-11 (VDSL2): Twisted Pair phone wire
    LED Indicators
    • 1 x Power LED
    • 2 x Link/Active Status for Ethernet port
    • 1 x Link LED for VDSL2 port
    • 1 x CO Mode indicator LED
    • 1 x CPE Mode indicator LED
    VDSL2 Line Code
    • Discrete multitone (DMT) modulation
    VDSL2 Transmission Mode
    • Packet Transfer Mode (PTM)
    Typical Power Consumption
    • 5 W
    Power Requirement: Input Voltage
    • 12VDC / 1A (Commercial-grade Power Adapter)
    • EMI Compliant: FCC class A
    • EMS Compliant: CE mark
    Operating Temperature
    • 0°C ~ 50°C (32°F ~ 122°F)
    • Fanless, free air cooling
    Storage Temperature
    • -20°C ~ 70°C (-4°F ~158°F)
    • 10% to 90% (non-condensing)
    Mounting Method
    • Desktop or Under Counter
    • 3.74" X 4.33" X 1.06” (95 mm X 110 mm X 27 mm)
    Shipping Weight
    • 3 lbs. (1.361 Kg)
    Power Requirements
    • External Switching Power Adapter
      (Input: 85-240VAC, 50/60Hz Output: 12V/1A)
    Agency Compliance
    • FCC Part 15 Class A, CE
    • RoHS compliant
    • 2 years (parts only)

    All Categories



    Sold Out