- Product Details
The Netsys HyperXtender ER Ethernet Extender Kit (NV-202EKIT) includes everything needed to quickly deploy one high-speed point-to-point Ethernet extender over long distances and is great for delivering video, data, and voice services and connecting remotely located wireless access points and other network devices, satellite buildings, and back-haul applications to name a few. The HyperXtender Ethernet Extenders can utilize existing phone lines or any network-grade twisted pair cable and only require one (1) twisted pair (2 wires) to operate. The Ethernet HyperXtender ER Solution saves you time and money by eliminating expense and hassle of fiber cable and equipment, leased line, and other data line services.
The HyperXtender ER Ethernet Extenders (NV-202E) come ready to plug and play out of the box for distances up to 10,000 feet (3 km) at an auto-configured bandwidth of 5.04Mbps downstream and 1.48Mbps upstream, or line speeds up to 100Mbps symmetrical at distances up to 1,000 feet (0.3 km), which is more than perfect for most applications. The bandwidth usage is automatically optimized to achieve the best speeds possible based on the surrounding environment, and there is no configuration required. The HyperXtender ER Ethernet Extender Solution also features the ability to extend telephone (POTS/ISDN/PBX) service over the same 2 wires by utilizing external filters (sold separately).
The HyperXtender ER Ethernet Extender Kit (NV-202EKIT) is simple to install and use. The NV-202E configured as Local is typically located in the Central Office, Computer Room, or Wiring Closet, with a router or switch connected to one of its RJ-45 Ethernet ports (LAN1 or LAN2). The NV-202E configured as Remote will be located at the destination point, with the appropriate network device/s (PC, WAP, IP camera, etc.) connected to the RJ-45 Ethernet port/s (LAN1 and/or LAN2). Next, connect one (1) twisted-pair of phone or network grade cable to the Line port of each unit using either the RJ-11 Jack, or terminal block on the front of the NV-202E. Last, the Local and Remote Units are connected to the AC power source and the link is established automatically on power up. Once the link is established, the link speed auto-configures to the optimum speed based on the surrounding environment to speeds of up to 100Mbps symmetrical.
The Netsys HyperXtender ER Ethernet Extender Kit can be used to connect any Ethernet based device anytime the length of a network connection exceeds the 328 feet (100m) distance limitation or when installing network cabling is impractical or cost prohibitive.
NO CONFIGURATION REQUIRED
Plug and play kit for one cost-effective point-to-point Ethernet extension up to 10,000 feet (3 km) over existing phone lines or network cable
Ideal for remotely located Wireless Access Points
RJ-11/Terminal Block combo for Line port.
Supports high bandwidth up to 100Mbps symmetrical (200Mbps aggregate)
Supports long reach mode up to 10,000 feet (3 km) with 24 gauge twisted-pair phone wire
Supports auto speed for Line port and Interleave mode selectable through CO side DIP switch
DIP switch for selecting CO and CPE modes
Supports long packet size up to 1536 bytes
Built-In Surge protection
2 X Auto-sensing 10/100 Mbps Ethernet port with Auto MDIX
Compact desktop design
802.3u Fast Ethernet
802.3x Flow Control
- 2 X VDSL2 Ethernet Bridge Modem (NV-202)
- 1 X User Manual Download Hyperlink
- 8 X Plastic Feet
- 2 X AC to DC Power Adapter
- 2 X Straight-through Ethernet Cables
- 2 X RJ-11 Cables
- RJ-45 (Ethernet): Category 3~6 UTP/STP
- RJ-11/Terminal BLock (VDSL2): Twisted Pair phone or network grade cable
- 1 x Power LED
- 2 x Link/Active Status for Ethernet port
- 1 x Link LED for VDSL2 (Line) Port
- 1 x CO Mode indicator LED
- 1 x CPE Mode indicator LED
- Discrete multitone (DMT) modulation
- Packet Transfer Mode (PTM)
- 5 W
- 12VDC / 1A (Commercial-grade Power Adapter)
- EMI Compliant: FCC class A
- EMS Compliant: CE mark
- 32°F ~ 122°F(0°C ~ 50°C)
- Fanless, free air cooling
- -4°F ~158°F (20°C ~ 70°C)
- 10% to 90% (non-condensing)
- Desktop or Under Counter
- 3.74" X 4.33" X 1.06” (95 mm X 110 mm X 27 mm) (Each Unit)
- 3 lbs. (1.361 Kg)
- External Switching Power Adapter
- (Input: 85-240VAC, 50/60Hz Output: 12V/1A)
- FCC Part 15 Class A, CE
- RoHS compliant
- 2 years (parts only)
Questions & Answers
I need to extend cat6 10/100/1000 to 500Ft
The NV-202EKIT is the perfect solution for this application! The NV-202EKIT will extend your LAN up to 10,000 feet using a single twisted pair of network or phone grade cable (including Cat6), and offers line speeds up to 100Mbps symmetrical up to 1,000 feet.
The NV-202EKIT includes two NV-202E Ethernet extenders, with one configured ad CO/local, and the other configured as CPE/remote. The NV-202E configured as local is typically installed at the origination point (where the router or switch is) and the NV-202E configured as remote is typically installed at the destination point ( remote location you are extending your Ethernet connection to). The long cable between the two NV-202E units connects to the Line port of each NV-202E (either RJ-11 port or 2-pin terminal block).
Please let me know if you have any other questions!
I have three areas in my home I need to use this in. I have a three pair phone cable running thru the home. The cable is untwisted, will their be interference issues using three kits on the same cables on different pairs? Is this an acceptable usage?
The NV-202EKIT requires one twisted pair of network or phone grade cable to function, so the untwisted cable will not work properly if at all and three kits on the same cable will make matters worse. Are you sure the cable is not twisted? Old style phone cable is typically twisted, but not as twisted as network grade cable. What is the Cable mfg and model? What is the color coding?
Can I use this system to extend Ethernet to Wi-Fi router? The distance is approximately 300'.
Yes, you can, but you shouldn’t need to at 300 feet if you’re using a Cat5 or better Ethernet Cable.
what did you do for the wire junction ? 6 rolls of 1000 feets. Crimp rj45 connector or just connect the pair together with solder and waterproof tape (shorther as possible) ?
Assuming this cable will be installed outdoors, there are many coupler/splice solutions available on the market. The solution needs to be outdoor rated, water/weather proof and direct bury rated depending on the installation. Some solutions involve outdoor telecom/network enclosures which make splices easier and accessible, but adds cost to the installation.
If the splices are being made indoors, then you could use our GF2120 Tool-less Ethernet Coupler/Splicer:
Please give us a call at 1-877-638-7971 or email us at email@example.com if you require further assistance.