Kit - VDSL2 Ethernet Extender (Over Coax or Twisted-Pair) with Remote Power & PoE - NV-202RPCEKIT


Price $445.00 $400.00 Online Sales Price

  • Product Details


The NV-202RPCEKIT VDSL2 Ethernet Extender (Over Coax or Twisted-Pair) with Remote Power & PoE delivers power and Ethernet IP connectivity to attached PoE devices at distances up to 6,562ft (2km) using a single twisted-pair of copper network or phone grade cable, while offering the flexibility of utilizing coaxial cable in place of network or phone cable (up to 3,608ft). The same twisted pair, or coaxial cable, carries both power and Ethernet data, making it the ideal solution for deploying Ethernet over distances which exceed the natural limitations of network cable, and electricity is limited or unavailable at the remote end.

Configured for plug and play operation right out of the box, the NV-202RPCEKIT is simple to install and use. The NV-202MC master is typically located at the central site, and connects to your router/switch. The NV-202SC end point is installed at the remote location, connected to the PoE network device (camera, WAP, etc.). Next, connect a single twisted pair of network or phone grade cable (up to 6,562 ft) to the 2-pin terminal block of each unit, or connect the coax cable (up to 3,608’) to the female F-connector of each unit. Lastly, connect the provided 48V power supply to the NV-202MC master, and the link will be established, with the NV-202RPCEKIT automatically determining line speed based on line conditions. It is important to confirm the wattage required for your PoE device and compare to the below distance-based performance chart before selecting this product.


    • Compliant with IEEE802.3, IEEE802.3u, IEEE 802.3 at PoE, ITU-G993.2 VDSL2 standards
    • Supports auto speed for Line port
    • Supports long reach mode up to 6,562ft (2km) / 7w power budget
    • Supports Surge protection for line port
    • Supports OVP / OCP / OTP power protection and reverse polarity auto adjustment
    • Supports 1 x 2-pin terminal block VDSL line port for single twisted-pair of network or phone grade phone cable
    • F-connector line port for coaxial cable
    • 1 x RJ-45 10/100 Ethernet port (NV-202MC)
    • 1 x RJ-45 10/100 Ethernet port with PoE (NV-202SC only)
    • DIP switch configuration of CO/CPE mode, Frequency (High Band/Low Band), SNRM (9bd/6db), and Interleave delay setting (8ms, INP=2 / 1ms, INP=0)
    • Supports long packet size up to 1536 bytes
    • Data and Remote Power work on the same single pair of network grade cable or phone line
    • Spectral compatibility with xDSL (2B1Q/4B3T)
    • Supports wall mounting

Technical Specifications

Product Kit Contents
    • 1 X NV-202MC Master
    • 1 X NV-202SC End Point
    • 8 X Rubber Feet
    • 1 X 48V/1.875A Desktop Switching Power Adapter with power cord
    • 2 X Straight-through Ethernet Cables
Cable Connections
    • 1 X RJ-45 (Ethernet) w/PoE: Cat. 5 or above UTP/STP
    • 1 X F-Type Female coaxial connector
    • 1 X Terminal Block (VDSL2):for single-twisted pair network or phone grade cable
LED Indicators
    • 1 x Power LED
    • 2 x Link/Active Status for Ethernet port
    • 1 x Link LED for VDSL2 line port
    • 1 x CO Mode indicator LED
    • 1 x CPE Mode indicator LED
VDSL2 Line Code
    • Discrete multitone (DMT) modulation
VDSL2 Transmission Mode
    • Packet Transfer Mode (PTM)
Typical Power Consumption
    • 5 W
Power Requirement: Input Voltage
    • 48VDC / 1.875A Power Adapter
Operating Temperature
    • 0°C ~ 50°C (32°F ~ 122°F)
    • Fanless, free air cooling
Storage Temperature
    • -20°C ~ 70°C (-4°F ~158°F)
    • 10% to 90% (non-condensing)
Mounting Method
    • Supports DIN-Rail mount installation
    • Supports wall mounting
    • NV-202MC: 169mm x 122mm x 35mm (6.65" x 4.8" x 1.38”)
    • NV-202SC: 169mm x 115mm x 35mm (6.65" x 4.53" x 1.38”)
Shipping Weight
    • 7 lbs. (3.175 Kg)
Agency Compliance
    • FCC Class A, CE
    • RoHS compliant
    • 2 years (parts only)

All Categories

Questions & Answers