HyperXtender ER Ethernet Extender - NV-202E – www.netsys-direct.com HyperXtender ER Ethernet Extender - NV-202E
HyperXtender ER Ethernet Extender - NV-202E - {product_type] - Ethernet Extender - www.netsys-direct.com

HyperXtender ER Ethernet Extender - NV-202E

Netsys

Price $162.50 $146.25 Online Sales Price

  • Product Details

Description

The Netsys Ethernet HyperXtender ER Ethernet Extender (NV-202E) provides a cost effective remote unit for the NV-800HE HyperXtender Managed Switch, NV-2400HE HyperXtender GT 24-Port Managed Ethernet Switch, and is part of the Ethernet HyperXtender ER Ethernet Extender Kit (NV-202EKIT). The NV-202E features auto-configuring speeds up to 100Mbps symmetrical (up to 1,000 feet, with speeds dropping off asymmetrically from there), automatically optimized based on the quality of the line and the distance with a maximum distance of 10,000' (3 km) over existing twisted-pair phone line or network cable, and can be configured as a CPE or CO modem using the DIP switches on the unit.

The Ethernet HyperXtender ER Ethernet Extender comes ready to plug and play out of the box for distances up to 10,000 feet (3 km) at an auto-configured bandwidth of 5.04Mbps downstream and 1.48Mbps upstream, or line speeds up to 100Mbps symmetrical at distances up to 1,000 feet (0.3 km), which is more than perfect for most applications. The bandwidth usage is automatically optimized to achieve the best speeds possible based on the surrounding environment, and there is no configuration required. The HyperXtender ER Ethernet Extender Solution also features the ability to extend telephone (POTS/ISDN/PBX) service over the same 2 wires and utilizing external filters (sold separately). With the NV-800HE HyperXtender Managed Switch , or NV-2400HE HyperXtender GT 24-Port Managed Ethernet Switch ,each link can be set to pre-configured speeds by using the unique bandwidth management features.

The HyperXtender ER Ethernet Extender is typically placed at the remote network device location and can be mounted on a desktop or under the counter. One of the NV-202E’s two RJ-45 Ethernet ports connects to a NIC, hub, switch, or other network device. Next, the Line port of the NV-202E is connected to the 2-wire twisted pair of phone or network cable extending (up to 10,000 feet/3 km) from the central location using the RJ-11 port or terminal block. Last, the NV-800HE, NV-2400HE, or a second NV-202E configured as a CO modem is installed and all equipment is connected to the AC power source and the link is established automatically on power up. The speed of the link will automatically configure itself based on the distance and quality of the line, with a maximum speed of 100Mbps symmetrical at distances up to 1,000' and a maximum distance of 10,000' at speeds of 5.04Mbps downstream and 1.48Mbps upstream. No configuration is required.

The Ethernet HyperXtender ER NV-202E provides a complete and cost-effective remote unit solution for Netsys’ full-featured HyperXtender Managed Ethernet Switches and the popular NV-202EKIT Ethernet HyperXtender ER Ethernet Extender Kit.

Speed vs. Distance (25K-30Mhz Spectrum - Low Band)

Features

    • NO CONFIGURATION REQUIRED

    • Plug and play kit for one cost-effective point-to-point Ethernet extension up to 10,000 feet (3 km) over existing phone lines or network cable

    • Ideal for remotely located Wireless Access Points

    • RJ-11/Terminal Block combo for Line port.

    • Supports high bandwidth up to 100Mbps symmetrical

    • Supports long reach mode up to 10,000 feet (3 km) with 24 gauge twisted-pair phone wire

    • Supports auto speed for Line port and Interleave mode selectable through CO side DIP switch

    • DIP switch for selecting CO and CPE modes

    • Supports long packet size up to 1536 bytes

    • Built-In Surge protection

    • Wall mountable

    • 2 X Auto-sensing 10/100 Mbps Ethernet port with Auto MDIX

    • RoHS compliant

    • Compact desktop design

    • 802.3 Ethernet

    • 802.3u Fast Ethernet

    • 802.3x Flow Control

 

Technical Specifications

Product Kit Contents
    • 1 X HyperXtender ER Ethernet Extender (NV-202E)
    • 1 X User Manual Download Hyperlink
    • 4 X Plastic Feet
    • 1 X AC to DC Power Adapter
    • 1 X Straight-through Ethernet Cable
    • 1 X RJ-11 Cable
Cable Connections
    • RJ-45 (Ethernet): Category 3~6 UTP/STP
    • RJ-11/Terminal Block (VDSL2): Twisted Pair phone wire
LED Indicators
    • 1 x Power LED
    • 2 x Link/Active Status for Ethernet port
    • 1 x Link LED for VDSL2 port
    • 1 x CO Mode indicator LED
    • 1 x CPE Mode indicator LED
VDSL2 Transmission Mode
    • Discrete multitone (DMT) modulation
Typical Power Consumption
    • 5 W
Power Requirement: Input Voltage
    • 12VDC / 1A (Commercial-grade Power Adapter)
EMC
    • EMI Compliant: FCC Class A
    • EMS Compliant: CE mark
Operating Temperature
    • 0°C ~ 50°C (32°F ~ 122°F)
    • Fanless, free air cooling
Storage Temperature
    • -20°C ~ 70°C (-4°F ~158°F)
Humidity
    • 10% to 90% (non-condensing)
Mounting Method
    • Desktop or Under Counter
Dimensions
    • 3.74" X 4.33" X 1.06” (95 mm X 110 mm X 27 mm) (Each Unit)
Shipping Weight
    • 3 lbs. (1.361 Kg)
Power Requirements
    • External Switching Power Adapter
    • (Input: 85-240VAC, 50/60Hz Output: 12V/1A)
Agency Compliance
    • FCC Part 15 Class A, CE
    • RoHS compliant
Warranty
    • 2 years (parts only)

All Categories

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question
Liquid error: Could not find asset snippets/sca-quick-view-template.liquid