Kit - VDSL2 Ethernet Extender (185Mbps) with Remote Power & PoE - NV-202RPEKIT


Price $400.00 $360.00 Online Sales Price

  • Product Details


The NV-202RPEKIT VDSL2 Ethernet Extender with Remote Power delivers power and Ethernet IP connectivity to attached PoE devices at distances up to 6,562ft (2km) using a single twisted-pair of copper network or phone grade cable. The NV-202RPEKIT includes one (1) powered NV-202M master unit and one (1) remotely powered NV-202S end point. A single 48V power supply provides power to the NV-202M unit, which then passes power to the NV-202S end point over the single twisted pair of phone or network-grade cable. The same twisted pair carries Ethernet data using innovative Power over VDSL transmission techniques, making it the ideal Ethernet extender solution for deploying Ethernet over long distances exceeding the natural limitations of network cable where electricity is limited or unavailable at the remote end. The remotely powered NV-202S end point provides a power budget of up to 15 Watts through the PoE port to the attached device, providing a flexible Ethernet extender solution for even the most challenging network installations.

The NV-202M Master unit and 48V power supply are typically located at the central site and connect to your router or switch and power source. The long twisted-pair phone or network grade cable (up to 6,562 feet) connects from the RJ-11 line port or 2-pin terminal bloc on the NV-202M to the RJ-11 line port or 2-pin terminal block on the NV-202S end point at the remote location. The Ethernet PoE port on the NV-202S then connects to the attached PoE device. The NV-202M unit automatically determines the line speed and PoE power budget depending on based on line conditions. The below chart shows what speed and PoE output wattage you can expect based on distance. It is important to confirm the power (Watts) required for attached PoE devices, and compare to the below chart before selecting this product.

Configured for plug and play operation right out of the box, the simple to install and use NV-202RPEKIT VDSL2 Ethernet Extender Kit with Remote Power is the perfect solution for network security cameras, wireless access points, security / RFID scanners, access control systems, and just about any challenging network application requiring a point-to-point Ethernet network connection over extended distances (up to 6,562 feet) when electricity is not available at the remote equipment location.


    • Compliant with IEEE802.3, IEEE802.3u, IEEE 802.3 at PoE, ITU-G993.2 VDSL2 standards
    • Supports auto speed for Line port
    • Supports long reach mode up to 6,562ft (2km) / 7w power budget
    • Supports Surge protection for line port
    • Support OVP / OCP / OTP power protection and revise polarity auto adjustment
    • Supports 1 x RJ-11/Terminal block for VDSL line port using single pair of network or phone grade phone cable
    • Supports 1 x RJ-45 10/100 Ethernet port (NV-202M)
    • Supports 1 x RJ-45 10/100 Ethernet port with PoE (NV-202S only)
    • Supports DIP switch configuration of CO/CPE mode, Frequency (High Band/Low Band), SNRM (9bd/6db), and Interleave delay setting (8ms, INP=2 / 1ms, INP=0)
    • Supports long packet size up to 1536 bytes
    • Data and Remote Power work on the same single pair of network grade cable or phone line
    • Spectral compatibility with xDSL (2B1Q/4B3T)
    • Supports wall mounting

Technical Specifications

Product Kit Contents
    • 1 X NV-202M Master
    • 1 X NV-202S End Point
    • 8 X Rubber Feet
    • 1 X 48V / 1.875A Desktop Switching Power Adapter with power cord
    • 2 X Straight-through Ethernet Cables
Cable Connections
    • 1 X RJ-45 (Ethernet) w/PoE: Cat. 5 or above UTP/STP
    • 1 X RJ-11 (VDSL2): Cat.3 24AWG with twisted Pair network or phone grade cable
    • 1 X Terminal Block (VDSL2): Cat.3 24AWG with twisted Pair network or phone grade cable
LED Indicators
    • 1 x Power LED
    • 2 x Link/Active Status for Ethernet port
    • 1 x Link LED for VDSL2 line port
    • 1 x CO Mode indicator LED
    • 1 x CPE Mode indicator LED
VDSL2 Line Code
    • Discrete multitone (DMT) modulation
VDSL2 Transmission Mode
    • Packet Transfer Mode (PTM)
Typical Power Consumption
    • 5 W
Power Requirement: Input Voltage
    • 48VDC / 1.875A Power Adapter
Operating Temperature
    • 0°C ~ 50°C (32°F ~ 122°F)
    • Fanless, free air cooling
Power Requirement: Input Voltage
    • -20°C ~ 70°C (-4°F ~158°F)
    • 10% to 90% (non-condensing)
Mounting Method
    • Supports DIN-Rail mount installation
    • Supports wall mounting
    • NV-202M: 169mm x 122mm x 35mm (6.65" x 4.8" x 1.38”)
    • NV-202S: 169mm x 115mm x 35mm (6.65" x 4.53" x 1.38”)
Shipping Weight
    • 7 lbs. (3.175 Kg)
Power Requirements
    • Input Voltage: 48VDC / 1.875A Power Adapter
Agency Compliance
    • FCC Class A, CE
    • RoHS compliant
    • 2 years (parts only)

All Categories

Questions & Answers