The NEW Netsys 4-Band VDSL CPE Modem with 4 Ethernet Ports (NVF-400R) provides a cost effective CPE modem for the NVF-2400S and NVF-800S HyperXtender Managed IP DSLAMs. The NVF-400R features four Ethernet ports and a built-in POTS/IDSN splitter.

The Netsys NVF-400R comes ready to plug and play out of the box for distances up to 6,200 feet (1.9 km) at an auto-configured line rate of 5 Mbps symmetrical, or line speeds of up to 25 Mbps symmetrical at distances up to 2,666 feet (0.8 km), which is more than perfect for most applications. The bandwidth is automatically optimized to achieve the best speeds possible based on the surrounding environment (line quality, etc.), with no configuration required. With the NVF-2400S and NVF-800S Netsys Managed IP DLSAMs, each link can be throttled from 100Kbps to 5/15/25 Mbps by using the unique bandwidth management features. The Netsys NVF-400R Solution also features the ability to extend telephone (POTS/ISDN/PBX) service over the same 2 wires and features built-in surge protection and POTS/ISDN splitters to eliminate external splitter devices.

The Netsys NVF-400R is typically placed at the remote network device location and can be mounted on a desktop or under the counter. The NVF-400R’s four RJ-45 Ethernet ports connect to a NIC, hub, switch, or other network devices and its RJ-11 Phone port connects to the RJ-11 port of the telephone set or fax machine jack. Next, the Line port of the CPE modem is connected to the RJ-11 telephone jack of the 2-wire twisted pair phone line (or network cable) connection extending (up to 6,200 feet/1.9km) from the central location. Last, the NVF-2400S, NVF-800S, or the NVF-200L is installed and all equipment is connected to the AC power source and the link is established automatically on power up. Once the link is established, the NVF-400R unit will automatically try to connect at 25 Mbps, and if the connection fails, it will attempt to reconnect at 15Mbps and finally at 5 Mbps. No configuration is required.

The Netsys NVF-400R 4-Band VDSL CPE Modem with 4 Ethernet Ports provides a complete and cost-effective CPE modem solution for Netsys’ full-featured Managed IP DSLAMs and the popular Netsys 4-Band VDSL Solution.

Detailed Specifications

Package Contents

• 1 X NVF-400R Unit
• 1 X User Manual CD
• 1 X AC to DC Power Adapter
• 1 X Straight-Through Ethernet Cable
• 1 X RJ-11 Cable

Compatible With

• NVF-800S
• NVF-2400S
• NVF-200LS

Client Port Features

• 1 Auto-sensing/auto-configuring VDSL Link presented on an RJ-11 connector with built-in surge protection
  • 5 Mbps up to 6,200 feet (1.9 km)
  • 15 Mbps up to 4,333 feet (1.3 km)
  • 25 Mbps up to 2,666 feet (0.8 km)
• Signal to Noise Ratio (SNR) Line Quality Monitoring
• Supports 4-wire pass-through
• Utilizes QAM Modulation
• Transmitter operates between 4.0 to 7.9 MHz
• Receiver operates between 0.9 to 3.9 MHz
• Spectral compatibility with xDSL, ISDN(2B1Q/4B3T), and HomePNA

POTS/ISDN Features

• 1 POTS/ISDN line presented on an RJ-11 connector with integrated POTS/ISDN splitter
• Band pass filter spectrum: 0 - 630 KHz

Ethernet Port Features

• 4 X 10/100 Mbps auto-sensing full or half-duplex RJ-45 Ethernet uplink port
• Supports flow control for full-duplex operation
• Supports back pressure for half-duplex operation
• Supports Auto MDIX
• Supports long packet size up to 1,536 bytes

LEDs

• 1 X Ready LED
• 3 X VDSL Link LED (5/15/25 Mbps)
• 4 X Link/Activity LED

Mounting Method

• Desktop or Under Counter

Dimensions

• 7.2" x 5.74" x 1.57" (184mm x 146Mm x40mm)

Shipping Weight

• 2 lbs. (0.9072Kg)

Power Requirements

• External Switching Power Adapter
  (Input: 100-240VAC, 50/60Hz Output: 12VDC/1A)

Power Consumption

• 7.5W
  

Operating Temperature

• -13 to 149°F (-25 to 65°C)

Humidity

• 10% to 90% Non-Condensing

Agency Compliance

• FCC Part 15 Class A, CE
• RoHS compliant

Warranty

• 1 year (parts only)