The Netsys Ethernet HyperXtender Plus – Remote Unit (NVF-200RE) provides a cost effective remote unit for the NVF-800E HyperXtender Managed Switches and is part of the NVF-200EKIT Ethernet HyperXtender Plus Kit. The NVF-200RE features one Ethernet port and a built-in POTS/IDSN splitter.

The Ethernet HyperXtender Plus NVF-200RE comes ready to plug and play out of the box for distances up to 6,200 feet (1.9 km) at an auto-configured line rate of 5 Mbps symmetrical, or line speeds of up to 25 Mbps symmetrical at distances up to 2,666 feet (0.8 km), which is more than perfect for most applications. The bandwidth is automatically optimized to achieve the best speeds possible based on the surrounding environment (line quality, etc.), with no configuration required. With the NVF-800E HyperXtender Managed Switches, each link can be throttled from 100Kbps to 5/15/25 Mbps by using the unique bandwidth management features. The Ethernet HyperXtender Solution also features the ability to extend telephone (POTS/ISDN/PBX) service over the same 2 wires and features built-in surge protection and POTS/ISDN splitters to eliminate external splitter devices.

The HyperXtender Plus Remote Unit is typically placed at the remote network device location and can be mounted on a desktop or under the counter. The NVF-200RE’s RJ-45 Ethernet port connects to a NIC, hub, switch, or other network device and its RJ-11 Phone port connects to the RJ-11 port of the telephone set or fax machine jack. Next, the Line port of the Remote Unit is connected to the RJ-11 telephone jack of the 2-wire twisted pair phone line (or network cable) connection extending (up to 5,000 feet/1524m) from the central location. Last, the NVF-800E, or the NVF-200LE is installed and all equipment is connected to the AC power source and the link is established automatically on power up. Once the link is established, the NVF-200RE unit will automatically try to connect at 25 Mbps, and if the connection fails, it will attempt to reconnect at 15Mbps and finally at 5 Mbps. No configuration is required.

The Ethernet HyperXtender Plus NVF-200RE provides a complete and cost-effective remote unit solution for Netsys’ full-featured HyperXtender Managed Ethernet Switches and the popular NVF-200EKIT Ethernet HyperXtender Plus Kit.

Detailed Specifications

Package Contents

• 1 X NVF-200RE Unit
• 4 X Plastic Feet
• 1 X User Manual CD
• 1 X AC to DC Power Adapter
• 1 X Straight-Through Ethernet Cable
• 1 X RJ-11 Cable

Compatible With

• NVF-800E
• NVF-200LE

Client Port Features

• 1 Auto-sensing/auto-configuring VDSL Link presented on an RJ-11 connector with built-in surge protection
  • 5 Mbps up to 6,200 feet (1.9 km)
  • 15 Mbps up to 4,333 feet (1.3 km)
  • 25 Mbps up to 2,666 feet (0.8 km)
• Signal to Noise Ratio (SNR) Line Quality Monitoring
• Supports 4-wire pass-through
• Utilizes QAM Modulation
• Transmitter operates between 4.0 to 7.9 MHz
• Receiver operates between 0.9 to 3.9 MHz
• Spectral compatibility with xDSL, ISDN(2B1Q/4B3T), and HomePNA

POTS/ISDN Features

• 1 POTS/ISDN line presented on an RJ-11 connector with integrated POTS/ISDN splitter
• Band pass filter spectrum: 0 - 630 KHz

Ethernet Port Features

• 1 X 10/100 Mbps auto-sensing full or half-duplex RJ-45 Ethernet uplink port
• Supports flow control for full-duplex operation
• Supports back pressure for half-duplex operation
• Supports Auto MDIX
• Supports long packet size up to 1,536 bytes

LEDs

• 1 X Ready LED
• 1 X VDSL Link LED
• 1 X Link/Activity LED

Mounting Method

• Desktop or Under Counter

Dimensions

• 3.74" x 4.33" x 0.94" (95mm x 110mm x 24mm)

Shipping Weight

• 2 lbs. (0.9072Kg)

Power Requirements

• External Switching Power Adapter
  (Input: 85-240VAC, 50/60Hz Output: 5VDC/1A)

Power Consumption

• 6W
  

Operating Temperature

• -4 to 158°F (-20 to 70 °C)

Humidity

• 10% to 90% Non-Condensing

Agency Compliance

• FCC Part 15 Class A, CE
• RoHS compliant

Warranty

• 1 year (parts only)