The Netsys Concierge Plus Broadband Ethernet Converter (NVF-200C) provides a high-speed remote unit for the NVF-800C Concierge Plus Broadband Access Concentrator and features one Ethernet port and a built-in POTS/IDSN splitter.

The Concierge Plus NVF-200C comes ready to plug and play out of the box and auto-configures speeds for optimum distances up to 6,200 feet (1.9 km) at an auto-configured line rate of 5 Mbps downstream and 1.4 Mbps upstream, or line speeds of up to 25 Mbps symmetrical at distances up to 2,666 feet (0.8 km), which is more than perfect for most applications. The bandwidth is automatically optimized to achieve the best speeds possible based on the surrounding environment (line quality, etc.), with no configuration required. The NVF-800C Broadband Access Concentrator can also configure the bandwidth for each broadband link at rates from 100Kbps to 5/10/15Mbps. The NVF-200C also features built-in surge protection and POTS/ISDN splitter to extend telephone (POTS/ISDN/PBX) service over the same 2 wires.

The Concierge Plus Broadband Ethernet Converter is typically placed in the guest room or at the remote network device location and can be mounted on or under the desktop. The NVF-200C’s RJ-45 Ethernet port connects to the Ethernet port on the Guest’s PC and its RJ-11 Phone port connects to the guest room telephone set. Next, the Line port of the NVF-200C is connected to the RJ-11 telephone jack of the 2-wire twisted pair phone line (or network cable) connection extending (up to 6,200 feet/1.9 km) from the Hotel Computer Room or Telephone Closet. Last, the NVF-800C is installed and all equipment is connected to the AC power source and the link is established automatically on power up. Once the link is established, the NVF-200R unit will automatically try to connect at 25 Mbps, and if the connection fails, it will attempt to reconnect at 15Mbps and finally at 5 Mbps. No configuration is required. The line rate can also be controlled via the NVF-800C concentrator.

The NVF-200C Broadband Ethernet Converter provides a complete and cost-effective remote unit for the Concierge Broadband Access Concentrators and enable the existing telephone service to operate over the same phone lines.

Detailed Specifications

Package Contents

• 1 X NVF-200C Unit
• 4 X Plastic Feet
• 1 X User Manual CD
• 1 X AC to DC Power Adapter
• 1 X Straight-Through Ethernet Cable
• 1 X RJ-11 Cable

Compatible With

• NVF-800C

Client Port Features

• 1 High-speed Link presented on an RJ-11 connector with built-in surge protection
  • 5 Mbps up to 6,200 feet (1.9 km)
  • 15 Mbps up to 4,333 feet (1.3 km)
  • 25 Mbps up to 2,666 feet (0.8 km)
• Bandwidth management from 100 Kbps to 5/15/25 Mbps
• Signal to Noise Ratio (SNR) Line Quality Monitoring
• Utilizes QAM Modulation
• Transmitter operates between 4.5 to 7.9 MHz
• Receiver operates between 0.9 to 3 MHz
• Spectral compatibility with xDSL, ISDN(2B1Q/4B3T), and HomePNA

POTS/ISDN Features

• 1 POTS/ISDN line presented on an RJ-11 connector with integrated POTS/ISDN splitter
• Band pass filter spectrum: 0 - 680 KHz

Ethernet Port Features

• 1 X 10/100 Mbps auto-sensing full or half-duplex RJ-45 Ethernet uplink port
• Supports flow control for full-duplex operation
• Supports back pressure for half-duplex operation

LEDs

• 1 X Ready LED
• 1 X High-Speed Link LED
• 1 X Link/Activity LED

Switching Features

• Switching Method: Store-and-Forward
• MAC Address Table: 8K addresses

Mounting Method

• Desktop or Under Counter

Dimensions

• 3.74" x 4.33" x 0.94" (95mm x 110mm x 24mm)

Shipping Weight

• 2 lbs. (0.9072Kg)

Power Requirements

• External Switching Power Adapter
  (Input: 100-240VAC, 50/60Hz Output: 5VDC/2A)

Operating Temperature

• -4 to 158°F (-20 to 70 °C)

Humidity

• 10% to 90% Non-Condensing

Agency Compliance

• FCC Part 15 Class A, CE
• RoHS Compliant